No. 51963
C-13310
C-13311
11
SERVICE ADJUSTMENTS
ADJUSTMENT PREPARATION:
1. You can make the necessary adjustments for this unit with
either the Remote Control Unit or With the adjustment tools
and parts as given below.
2. Adjustment with the Remote Control Unit is made on the
basis of the initial setting values, however, the new setting
values which set the screen to its optimum condition may
differ from the initial settings.
3. Make sure that AC power is turned on correctly.
4. Turn on the power for set and test equipment before use, and
start the adjustment procedures after waiting at least 30 minutes.
5. Unless otherwise specified, prepare the most suitable reception
or input signal for adjustment.
6. Never touch any adjustment parts which are not specified in the
list for this adjustment - variable resistors, transformers,
condensers, etc.
7. Presetting before adjustment.
Unless otherwise specified in the adjustment instructions, preset
the following functions with the remote control unit:
User mode position
MENU ITEM
PRESET VALUE
VIDEO STATUS
STANDARD
/ TINT / COLOUR
PICTURE / BRIGHT
CENTER
DETAIL
ADJUSTMENT EQUIPMENT
1. DC voltmeter (or digital voltmeter)
2. Oscilloscope
3. Signal generator (Pattern generator)
[
NTSC
]
4. Remote control unit
5. TV audio multiplex signal generator.
6. Frequency counter
ADJUSTMENT ITEMS
Adjustment item
Adjustment item
Adjustment item
z
B1 POWER SUPPLY
z
WHITE BALANCE
z
PURITY / CONVERGENCE
z
VIDEO / DEF. CIRCUIT
Low Light / High Light
PURITY
IF VCO
z
PICTURE
STATIC CONVERGENCE
RF. AGC
SUB BRIGHT
DYNAMIC CONVERGENCE
FOCUS
SUB CONTRAST
V. SIZE
SUB COLOR
H. POSITION
SUB TINT
Содержание C-13310/S
Страница 26: ...No 51963 C 13310 C 13311 26 ...
Страница 43: ...No 51963 C 13310 C 13311 35 Memo ...