42
Functional
No
Names
Description
Reference
group
Page
SYSTEM
381
JOG FEELENG (LOCAL)
Selects jog dial operation response level ......................................................... 59
382
9 PIN ID
䡲
---(1ST)
Sets the first digit of the ID code ...................................................................... 59
383
9 PIN ID-
䡲
--(2ND)
Sets the second digit of the ID code ................................................................. 59
384
9 PIN ID--
䡲
-(3RD)
Sets the third digit of the ID code ..................................................................... 59
385
9 PIN ID---
䡲
(4TH)
Sets the fourth digit of the ID code ................................................................... 59
386
MUTING AT NO TAPE
ON/OFF of the EE signal output when no tape is loaded ................................. 59
387
CF FLAG REPLY (525)
Selects the number of fields for which the color frame flag is set for
9-pin remote control ........................................................................................ 60
387p
CF FLAG REPLY (625)
Selects the number of fields for which the color frame flag is
set for 9-pin remote control ............................................................................. 60
389
MULTI CUE MODE
Switches Multi Cue mode ON/OFF .................................................................. 60
390
SWAP VTR SELECT
Selects the player VTR type during swap editing ............................................. 60
391
SYNCHRONIZATION
Enables/disables the bump mode during swap editing .................................... 60
393
SYNC GRADE
Selects the editing accuracy during swap editing ............................................. 60
395
AUTO-EE
Selects whether the BR-D92 automatically switches to EE for single monitor
operation during swap editing ......................................................................... 60
TIME CODE
400
VITC LINE-1 SEL (525)
Selects the vertical interval line for adding VITC-1 ........................................... 61
400p
VITC LINE-1 SEL (625)
Selects the vertical interval line for adding VITC-1 ........................................... 61
401
VITC LINE-2 SEL (525)
Selects the vertical interval line for adding VITC-2 ........................................... 61
401p
VITC LINE-2 SEL (625)
Selects the vertical interval line for adding VITC-2 ........................................... 61
402
CTL DF SELECT (525)
Sets the CTL counter to operate in NONDROP/DROP frame mode ............... 61
403
REGEN MODE
Selects what elements of time the code (TC, UB) are regenerated ................. 61
409
EXT REGEN TC
Selects external source (LTC/ VITC) for regeneration ..................................... 62
410
AUTO REGEN MODE
Selects the edit mode in which time code is regenerated. ............................... 62
421
TCG CF FLAG
Turns the color frame flag ON/OFF for the time code bit ................................. 62
450
SUB TC (VITC) REC
Selects whether incoming VITC is recorded onto the Sub-Time Code ............ 62
451
VITC OUT SELECT
Selects the VITC time code output source (Main/Sub) time code ................... 62
452
SEARCH LTC
Selects whether LTC time code is output in the Search mode ......................... 62
457
UB PRESET AUTO
Selects if the user bit data stored in the memory is recorded preferentially ..... 63
ON-SCREEN
501
CHARA H POSITION
Sets the horizontal display position of the on-screen data ............................... 63
502
CHARA V POSITION
Sets on-screen data vertical display position ................................................... 63
504
INFORMATION SELECT
Selects the type of information shown by the on-screen display ...................... 63
505
REMAIN ENABLE
Enables/ disables the tape “Remaining Time” display indication ..................... 63
512
MUTING/ALARM MESSAGE
Selects whether “MUTING” or “CONDITION ALARM” appears on-screen ...... 64
513
EDIT ON SCREEN
ON/OFF of edit on-screen display ................................................................... 64
TBC.FRAME
601
V.BLANK MASK
Turns the V sync section masking ON/OFF during playback ........................... 64
MEMORY
620
DUBBING LOOP
Enables/ disables the Dubbing Loop (multi-gen test) function ......................... 64
5 MENU SWITCH SETTING DETAILS
5-1 MENU SWITCH LIST
43
Selects the reference sync signal used by the
servo system.
EXT
: Synchronizes with the signal applied to
the[REF] input connector regardless of
VCR mode (playback or record).
AUTO : Synchronizes with the signal applied to
the [REF] input connector during
playback.The VCR locks to the video
input during recording. (If no signal is
present on the [REF] connector and video
input connector, the VCR synchronizes to
an internal clock signal regardless of this
menu's setting).
Switches the operation mode lock ON/OFF.
Set to ON to lock the VCR in the current mode.
When “OPERATION LOCK” is ON, you cannot
operate the control buttons, switches, knobs and
dials on the VCR or change any menu switch
settings other than this menu switch itself. Only the
[POWER] switch and the [PHONES LEVEL] adjust
knob remain operable.
5 MENU SWITCH SETTING DETAILS
5-2 MENU SWITCH SETTING CONTENT
<SERVO> [ ] : Factory setting Functions enclosed in
are not available on the PAL SYSTEM.
Menu SW
On-screen
Counter
On-screen
No.
display
display
display
002
OPERATION
[0]
[OFF]
LOCK
1
ON
003
SYNC SELECT
1
EXT
[3]
[AUTO]
005
AUTO TRACKING
0
OFF
[1]
[ON]
008
CAP LOCK (525)
[0]
[SW SEL]
1
2 FIELD
2
4 FIELD
Selects manual or automatic tracking adjustment in
the Play mode.
ON : The tracking value is automatically adjusted
to the optimum position when the Play mode
is engaged. The [TRACKING] knob is not
operable. When the Automatic Tracking mode
is engaged, tracking adjustment takes several
seconds. During this time, audio output
signals are derived from the linear tracks.
OFF : Tracking can be adjusted manually with the
[TRACKING] knob. When the meter
indication is set to “Tracking”, the
[TRACKING] button blinks.
Selects the color frame servo sync system for
NTSC signals.
SW SEL : The color frame servo setting is
determined by the sub panel’s [CF]
switch setting.
2 FIELD : The frame servo is set. Color framing is
not executed.
4 FIELD : 4 field color frame servo is executed.
When the contents of a menu item differ for NTSC and PAL, this is indicated after the menu item name by (525)
for NTSC and (625) for PAL. With PAL, “p” is shown after the menu No.
Item
Content
Setting
