JVC BLUEscent DLA-VS45NV, Инструкция по эксплуатации

Страница: 32 / 74

Display Mode
For managing the e-shift status
v
and the lighting condition of the light sources.
Setting Description
Normal Only the laser light source lights up.
NV Only the IR light source lights up.
e-shift
v
This is the mode for displaying e-shift. Only the laser light source lights up.
NV(e-shift)
v
This is the mode for displaying e-shift. Only the IR light source lights up.
NV(FS) The laser light source and IR light source light up alternately frame by frame.
NV(e-shift FS)
v
This is the mode for displaying e-shift. The laser light source and IR light source
light up alternately frame by frame.
3D This is the mode for displaying 3D videos.
0
The selectable “Display Mode” settings vary according to input signal.
List of selectable “Display Mode” according to input signal
Input Signal Display Mode
Single (DP1-DP4) 24, 25, 30, 50, 60 Hz Normal / NV
Dual - stripes 50, 60 Hz
Quad - stripes 60 Hz
Quad - cross
Dual - stripes
120 Hz Normal / NV / e-shift
v
/
NV(e-shift)
v
/ 3D
Quad - stripes
Quad - cross
Dual - frame sequential
50 Hz, 60 Hz Normal / NV / e-shift
v
/
NV(e-shift)
v
/ NV(FS) /
NV(e-shift FS)
v
/ 3D
Quad - frame sequential 60 Hz
No signal Normal / e-shift
v
Out of range Normal
e-shift polarity
v
For switching the polarity of e-shift.
Setting Description
Positive Activates e-shift using positive polarity signal.
Negative Activates e-shift using negative polarity signal.
0
This function cannot be used except when “Display Mode” is set to “e-shift”, “NV(e-shift)”, “NV(e-shift FS)” or “3D”.
IR Enhance Mode
For switching the function to support the power of the IR light source.
Setting Description
Off Disables the support function.
On Enables the support function.
32
Adjust/Set