JVC AX-M9000, Руководство по обслуживанию

Страница: 7 / 50

AX-M9000
1-7
Prior to performing the following procedure, remove
the metal cover and the rear panel.
Remove the current mode source selector board
assembly and the rear terminal panel.
Remove the five screws Y attaching the signal
processing board assembly.
Remove the connectors CN251 and CN252.
1.
2.
3.
Prior to performing the following procedure, remove
the metal cover and the rear panel.
Remove the six screws W attaching the RCA pins on
the current mode source selector board assembly.
Then, the current mode source selector board can
be removed.
Remove the four screws X attaching the cannon
connector on the signal processing board.
Then, the rear terminal panel can be removed.
1.
2.
3.
Removing the current mode source
selector board assembly and rear
terminal panel (See Fig. 16)
Removing the signal processing board
assembly (See Fig. 17)
Removing the power switch board
assembly (See Fig. 18)
Prior to performing the following procedure, remove
the metal cover.
Remove the four screws Z attaching the power
switch board assembly.
Remove the cable connecting to the transformer.
1.
2.
Fig.17
Fig.18
Fig.16
W
X
Current mode source selector board assembly
Rear terminal panel
Y
Y
Z
Signal processing board
Power
switch
board