No. 51994
AV32X25EUS / AV32X250EUS
AV32X25EIGY / AV32X25EKGY
AV28X25EUS / AV28X25EIGY
AV28X25EKGY
10
REMOVING THE CRT
∗
Replacement of the CRT should be performed by 2 or more
pers ons.
•
After removing the c over, chassis etc.,
1. Putting the CRT c hange table on soft cloth, the CRT change table
should also be c overed with s uch soft cloth (shown in Fig.8).
2. While keeping the s urfac e of CRT down, mount the TV s et on the
CRT change table balanced will as shown in Fig.9.
3. Remove 4 sc rews marked by arrows with a box type screw driver
as s hown in Fig.9.
•
Sinc e the cabinet will drop when screws have been removed, be
sure to support the cabinet with hands.
4. After 4 screws have been removed, put the cabinet slowly on
cloth (At this time, be carefully so as not to damage the front
surfac e of the c abinet) shown in Fig.10.
•
The CRT should be ass embled according to the opposite
sequence of its dismounting steps.
∗
The CRT change table should preferably be smaller that the CRT
surfac e, and its height be about 35c m.
CRT CHANGE TABLE
CLOTH
APPROX.
35cm
CRT
CRT
CHANGE
TABLE
BOX
TYPE
SCREW
DRIVER
Fig. 8
Fig. 10
CRT
CABINET
CRT
CHANGE TABLE
Fig. 9
