JVC AV24WT5EIS, Руководство по обслуживанию

Страница: 31 / 39

No. 51776
AV28WT5EPS
AV28WT5EIS
AV28WT5EKS
31
DEFLECTION CIRCUIT ADJUSTMENT
There are 7 modes of the adjustment ( 1 ) 50Hz mode (
① ① ① ①
PANORAMIC
② ② ② ②
FULL
③ ③ ③ ③
REGULAR
④ ④ ④ ④
14:9 ZOOM
⑤ ⑤ ⑤ ⑤
16:9 ZOOM
⑥ ⑥ ⑥ ⑥
16:9
ZOOM SUB TITLE ), ( 2 ) 60Hz mode ( each aspect mode )
･ ･･ ･･ ･･ ･･ ･･ ･･ ･･ ･･ ･･ ･
depending upon the kind of signals ( vertical frequency 50Hz / 60Hz ).
"
The adjustment using the remote control unit is made on the basis of the initial setting values.
"
When the 50Hz PANORAMIC mode has been established, the setting of other modes will be done automatically.
However, if the picture quality has not been optimized, adjust each mode again, respectively.
"
The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
Initial setting value (1/2)
Initial setting value
PANORAMIC 14:9 ZOOM 16:9 ZOOM
16:9 ZOOM
SUB TITLE
Setting item Adjustment name
50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
1. V-SHIFT Vertical center +2 -1 +0 +0 +0 +0 +0 +0
2. V-SIZE Vertical height +6 -3 +16 +15 +36 +34 +38 +36
3. SUBTITLE SUBTITLE BOTTOM Vertical Linearity -8 +0 +0 +0 +0 +0 +11 +15
4. H-CENT Horizontal center -8 +4 +0 +1 +0 +0 +0 +0
5. H-SIZE Horizontal width +10 +0 -13 -14 -6 -6 -6 -6
6. EW-PIN Side pin correction -23 +0 -1 -1 -1 -1 -1 -1
7. TRAPEZ Trapezoidal distortion correction +2 -1 -1 +0 -1 +0 -1 +0
8. EW.COR.L CORNER PIN correction Low side +0 +0 +0 +0 +0 +0 +0 +0
9. EW.COR.H CORNER PIN correction High side +0 +0 +0 +0 +0 +0 +0 +0
10.V.S-COR Vertical height correction +4 +0 +0 +0 +0 +0 +4 +0
11.V-LIN Vertical Linearity -1 +0 +0 +0 +1 +0 +0 +0
12.H-BLK-R BLANKING POSITION of Right side +0 +0 +118 +119 +0 +0 +0 +0
13.H-BLK-L BLANKING POSITION of Left side +0 +0 +28 +24 +0 +0 +0 +0
14.V-EHT
(Do not adjust) V size correction level caused by EHT change
-4 +0 +0 +0 +0 +0 +0 +0
15.H-EHT
(Do not adjust) H size correction level caused by EHT change
-3 +0 +0 +0 +0 +0 +0 +0
16.EHT-GAIN
(Do not adjust) Size correction gain caused by EHT change
+0 +0 +0 +0 +0 +0 +0 +0
Initial setting value (2/2)
Initial setting value
FULL REGULAR
Setting item Adjustment name
50Hz 60Hz 50Hz 60Hz
1. V-SHIFT Vertical center -1 +0 +0 +0
2. V-SIZE Vertical height -6 -6 -3 -3
3. SUBTITLE SUBTITLE BOTTOM Vertical Linearity +0 +0 +0 +0
4. H-CENT Horizontal center +0 +0 +1 +1
5. H-SIZE Horizontal width -6 -6 -22 -23
6. EW-PIN Side pin correction -1 +0 +0 +0
7. TRAPEZ Trapezoidal distortion correction +0 +0 -1 -1
8. EW.COR.L CORNER PIN correction Low side +0 +0 +0 +0
9. EW.COR.H CORNER PIN correction High side +0 +0 +0 +0
10.V.S-COR Vertical height correction +0 +0 +0 +0
11.V-LIN Vertical Linearity +0 +0 +0 +0
12.H-BLK-R BLANKING POSITION of Right side +0 +0 +118 +119
13.H-BLK-L BLANKING POSITION of Left side +0 +0 +31 +25
14.V-EHT
(Do not adjust)
Vsize correction level caused by EHT change +0 +0 +0 +0
15.H-EHT
(Do not adjust)
Hsize correction level caused by EHT change +0 +0 +0 +0
16.EHT-GAIN
(Do not adjust)
Size correction gain caused by EHT change +0 +0 +0 +0
(28” Model)