JVC AV-N48P55/H, Руководство по обслуживанию, Страница: 51 / 113

(No.YA166)1-51
OVERALL
CONVERGENCE
(POINT)
adjustment Signal
generator
Remote
control unit
[ 7.CONVER B ] NOTE:
Perform this adjustment after performing OVERALL
CONVERGENCE (LINE) check.
It adjusts displaying and checking adjustment data by
the [DISPLAY] key. Adjust in order of Area A, Area B,
Area C and Area D.
(1) Receive NTSC crosshatch signal.
(2) Select 7.CONVER B from SERVICE MENU. Then
appear green crosshatch pattern for adjustment.
(See Fig.1)
(3) Press [DISPLAY] key for displaying and checking
adjustment data.
(4) Press [ 2 ] / [ 4 ] / [ 5 ] / [ 6 ] / [ 8 ] keys respectively,
move the cursor to the adjusting point.
(5) Press [CH+] / [CH-] / [VOL+] / [VOL-] keys, adjust the
position of the adjusting point so that it is located at
the place as shown in Fig.2.
(6) Adjust Area A.
(7) Adjust Area B.
(8) Adjust Area C.
(9) Adjust Area D. It adjusts toward an outside from the
inner side of a screen. (e.g. H#3 > H#2 > ---)
H#0 is fixed data with the value inputted by
adjustment of Area C. When the point of H#0 needs
to be adjusted, adjusts the data of H#1 and H#2.
If the data of H#1 adjusts H#0, H#2 will move, the
data of H#2 adjusts H#1 and H#2. It repeats if
needed. (See Fig.3)
(10) Press [SELECT] key to select the red and blue
crosshatch patterns, respectively, and make
convergence adjustments so that they align with the
adjusting points of the green crosshatch pattern
(reference color).
(11) Press [OK] key to change the display colors to three
colors from two colors (adjusting color + green) and
make sure that the convergence has been aligned
with each other.
(12) Press [MUTING] key to memorize the set values.
Fig.3
Fig.1
Fig.2
Item
Measuring
instrument
Test point Adjustment part Description
H#0H#1
ADJUSTMENT PROCEDURE OF LINE H#1
NOTE:
Adjust in consideration of a surrounding line moving.
H#2 H#0H#1 H#2 H#0H#1 H#2
Cursor Point of adjustment
A1
A2
A3
A4
B1
B2
B3
B4
H#4 H#3 H#2 H#0
V#0
V#1
V#2
V#3
V#4
V#5
V#6
V#7
V#8
H#1 H#5 H#6 H#8 H#7
H#4 : 0 V#4 : 0 H#4 : 0 V#4 : 0 H#4 : 0 V#4 : 0
Area A
Area B
Area D Area C
ASPECT
LIGHT
INPUT SELECT FREEZE SWAP
C.C. INDEX TWIN
TUNE
MULTI SCREEN
SOUND
OK
RM-C1257G
BACK
REMOTE CONTROL KEY POSITION
SELECT key
For adjusting
color change
INPUT key
For adjustment
pattern change
Crosshatch
/ Adjust point
crosshatch
Number keys
For cursor shifting
[2] : up
[4] : left
[5] : center
[6] : right
[8] : down
OK key
Display colors
change for adjusting
VOL+ / VOL- /
CH+ / CH- keys
For convergence
adjustments
[CH+] : up
[CH- ] : down
[VOL+] : left
[VOL -] : right
DISPLAY key
Displaying
adjustment data
MUTING key
For storing
adjustmentdata
in memory
A1
SPAN TABLE (mm)
AV-N48P55 174
A2
348
A3
435
A4
522
B1
82
B2
164
B3
246
AV-N56P55 204 407 509 611 96 192 287 335
B3
287