AV-65WP74
1-56 (No.52096)
3.8.4.5
DEFLECTION ADJUSTMENT(2) ••••••• RGB respectively
Item
Measuring
instrument
Test point
Adjustment part
Description
OVERALL
CONVERGENCE
adjustment (1)
[LINE SPHPE]
Signal
generator
Remote
control unit
[ 6.CONVER A ]
CPA08 : FINE OFF
CCA01 : C H CENT
CCA02 : C H SIZE
CCA03 : C H LIN
CCA05 : C EW PIN
CCA09 : V SIZE
CCA10 : V KEY
CCA11 : TB PIN
NOTE:
Retain the default value of this adjustment. It is not
necessary to carry out the adjustment unless the image on
the screen is significantly deformative. If you performed
this adjustment, open the user MENU "INITIAL SETUP"
and execute AUTO of CONVERGENCE after the
adjustment.
(1) Receive NTSC cross-hatch signal.
(2) Select 6.CONVER A from SERVICE MENU.
(3) Select <CPA08> (FINE OFF).
(4) Change the data 0 to1. (Clear the fine adjustment data)
(5) Press [INPUT] key to select <CCA01> (C H CENT).
Then a green cross-hatch pattern for adjustment will be
displayed on the screen.
(6) Make sure that the heavy lines as shown in figure are
almost in alignment with the lines of the green cross-
hatch pattern (reference color). If the lines are out of
alignment significantly, adjust <CCA02> (C H SIZE),
<CCA03> (C H LIN), <CCA05> (C EW PIN), <CCA09>
(V SIZE) and <CCA11> (TB PIN), respectively. (Refer
to under figure)
(7) Press [SELECT] key to change the adjusting color to
red and blue, in turn, and make the adjustments in the
same manner as for 6. above.
*
In adjustments for red and blue, the adjustment of
<CCA10> (V KEY) is also available.
NOTE:
Press [OK] key to change the display colors.
Whenever [OK] key is pressed, the menu will
sequence in this order: "Two colors (adjusting
color+green)"--->"Three colors (RGB)"
(8) When the adjustments have been completed, press
[MUTING] key and memorize the set values.
(9) Select <CPA08>.
(10) Change the <CPA08> 1 to 0.
(11) Press [MUTING] key and memorize the set values.
<CCA02> H. SIZE
<CCA03> C H LIN
<CCA10> V KEY
<CCA11> TB PIN
PARALLEL
STRAIGHT
A
B
A=B
<CCA05> EW PIN
<CCA09> V. SIZE
STRAIGHT
STRAIGHT
STRAIGHT
For this adjustment, it is necessary to use a
remote control unit (e.g. RM-C322G) with
INPUT key. In order to change the adjusting
items, use INPUT key. When you press
INPUT key, the adjusting items will change in
the order of CPA CCA CBA key.
Cursor
473mm
247mm
1440mm
222mm
183mm
810mm
Fourth lines from the vertical center
line upward and downward.
Fourth lines from the horizontal center line right
118mm
RM-C1200G
POWER
VIDEO
STATUS
INPUT2
INPUT3
INPUT4
DIGITAL-IN
INPUT1
SPLIT
100+
3
9
6
/TV
MUTING
MENU
C.C.
BACK
TV CATV VCR DVD
THEATER
PRO
NATURAL
CINEMA
LIGHT
SLEEP TIMER DISPLAY
SOUND
1
7
4
2
8
0
5
POP
FREEZE
SWAP
SELECT
INDEX
ASPECT
EZ SURF
+
CH
VOL
VOL
+
CH
OK
REC
OPEN/CLOSE
STILL/PAUSE
STOP PAUSE
PLAY
FF
REW
VCR CHANNEL
PREV NEXT
TV/VCR
VCR/DVD
POWER
MULTI SCREEN
REMOTE CONTROL KEY POSITION
SELECT key
For adjusting
color change
Item No.change
[CH+] : up
[CH- ] : down
CH+ / CH- key
Setting value
change
[VOL+] : up
[VOL -] : down
VOL+ / VOL-
key
MUTING key
For storing adjustment
data in memory
OK key
For display colors
change for adjusting
INPUT key
[RM-C322G]
CPA
CCA
CBA
Содержание AV-65WP74/HA
Страница 69: ...AV 65WP74 No 52096 1 69 ...