manualshive.com logo in svg

JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702, Руководство по обслуживанию

На нашем сайте вы можете бесплатно скачать руководства пользователя для телевизоров JVC AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702. Здесь вы найдете все необходимые инструкции для правильной настройки и использования вашего устройства. Загрузите их прямо сейчас с {сайт}.

Поделиться
Скачать
background image

AV-36F702

AV-36F802

No. 51907 2

SAFETY PRECAUTIONS

1. The design of this product contains special hardware, many circuits

and components specially for safety purposes. For continued pro-
tection, no changes should be made to the original design unless
authorized in writing by the manufacturer. Replacement parts must
be identical to those used in the original circuits. Service should be
performed by qualified personnel only.

2. Alterations of the design or circuitry of the products should not be

made. Any design alterations or additions will void the manufactur-
er's warranty and will further relieve the manufacturer of responsi-
bility for personal injury or property damage resulting therefrom.

3. Many electrical and mechanical parts in the products have special

safety-related characteristics. These characteristics are often not
evident from visual inspection nor can the protection afforded by
them necessarily be obtained by using replacement components
rated for higher voltage, wattage, etc. Replacement parts which have
these special safety characteristics are identified in the parts list of
Service manual. Electrical components having such features are
identified by shading on the schematics and by ( 

 ) on the

parts list in Service manual. The use of a substitute replacement
which does not have the same safety characteristics as the recom-
mended replacement part shown in the parts list of Service manual
may cause shock, fire, or other hazards.

4. Use isolation transformer when hot chassis.

The chassis and any sub-chassis contained in some products are
connected to one side of the AC power line. An isolation transformer
of adequate capacity should be inserted between the product and
the AC power supply point while performing any service on some
products when the HOT chassis is exposed.

5. Don't short between the LIVE side ground and ISOLATED (NEU-

TRAL) side ground or EARTH side ground when repairing.
Some model's power circuit is partly different in the GND. The dif-
ference of the GND is shown by the LIVE : ( 

 ) side GND, the

ISOLATED(NEUTRAL) : ( 

 ) side GND and EARTH : ( 

 ) side

GND. Don't short between the LIVE side GND and
ISOLATED(NEUTRAL) side GND or EARTH side GND and never
measure with a measuring apparatus (oscilloscope etc.) the LIVE
side GND and ISOLATED(NEUTRAL) side GND or EARTH side
GND at the same time.
If above note will not be kept, a fuse or any parts will be broken.

6. If any repair has been made to the chassis, it is recommended that

the B1 setting should be checked or adjusted (See ADJUSTMENT
OF B1 POWER SUPPLY).

7. The high voltage applied to the picture tube must conform with that

specified in Service manual. Excessive high voltage can cause an
increase in X-Ray emission, arcing and possible component dam-
age, therefore operation under excessive high voltage conditions
should be kept to a minimum, or should be prevented. If severe
arcing occurs, remove the AC power immediately and determine
the cause by visual inspection (incorrect installation, cracked or
melted high voltage harness, poor soldering, etc.). To maintain the
proper minimum level of soft X-Ray emission, components in the
high voltage circuitry including the picture tube must be the exact
replacements or alternatives approved by the manufacturer of the
complete product.

8. Do not check high voltage by drawing an arc. Use a high voltage

meter or a high voltage probe with a VTVM. Discharge the picture
tube before attempting meter connection, by connecting a clip lead
to the ground frame and connecting the other end of the lead through
a 10k

Ø

 2W resistor to the anode button.

9. When service is required, observe the original lead dress. Extra

precaution should be given to assure correct lead dress in the high
voltage circuit area. Where a short circuit has occurred, those com-
ponents that indicate evidence of overheating should be replaced.
Always use the manufacturer's replacement components.

10. Isolation Check

(Safety for Electrical Shock Hazard)
After re-assembling the product, always perform an isolation check
on the exposed metal parts of the cabinet (antenna terminals, video/
audio input and output terminals, Control knobs, metal cabinet,
screwheads, earphone jack, control shafts, etc.) to be sure the prod-
uct is safe to operate without danger of electrical shock.

(1) Dielectric Strength Test

The isolation between the AC primary circuit and all metal parts
exposed to the user, particularly any exposed metal part having a
return path to the chassis should withstand a voltage of 1100V AC
(r.m.s.) for a period of one second.
(. . . . Withstand a voltage of 1100V AC (r.m.s.) to an appliance rated
up to 120V, and 3000V AC (r.m.s.) to an appliance rated 200V or
more, for a period of one second.)
This method of test requires a test equipment not generally found in
the service trade.

(2) Leakage Current Check

Plug the AC line cord directly into the AC outlet (do not use a line
isolation transformer during this check.). Using a “Leakage Current
Tester”, measure the leakage current from each exposed metal part
of the cabinet, particularly any exposed metal part having a return
path to the chassis, to a known good earth ground (water pipe, etc.).
Any leakage current must not exceed 0.5mA AC (r.m.s.).
However, in tropical area, this must not exceed 0.2mA AC (r.m.s.).

•

 Alternate Check Method

Plug the AC line cord directly into the AC outlet (do not use a line
isolation transformer during this check.). Use an AC voltmeter hav-
ing 1000 ohms per volt or more sensitivity in the following manner.
Connect a 1500

Ø

 10W resistor paralleled by a 0.15µF AC-type ca-

pacitor between an exposed metal part and a known good earth
ground (water pipe, etc.). Measure the AC voltage across the resis-
tor with the AC voltmeter. Move the resistor connection to each ex-
posed metal part, particularly any exposed metal part having a re-
turn path to the chassis, and measure the AC voltage across the
resistor. Now, reverse the plug in the AC outlet and repeat each
measurement. Any voltage measured must not exceed 0.75V AC
(r.m.s.).  This corresponds to 0.5mA AC (r.m.s.).
However, in tropical area, this must not exceed 0.3V AC (r.m.s.).
This corresponds to 0.2mA AC (r.m.s.).

11. High voltage hold down circuit check.

After repair of the high voltage hold down circuit, this circuit shall be
checked to operate correctly.
See item “How to check the high voltage hold down circuit”.

GOOD
EARTH
GROUND

0.15 

µ

F  AC-TYPE

AC VOLTMETER
(HAVING 1000

Ø

/V,

OR MORE SENSITIVITY)

PLACE THIS PROBE
ON EACH EXPOSED
METAL PART

1500

Ø

  10W

A          V

This mark shows a fast

POWER CORD
REPLACEMENT WARNING

Connecting thr white line side of
power cord to “WHT” character side.

operating fuse, the
letters indicated below
show the rating.

PWB

WHT

PW

White line side

Содержание AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702








































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AV-36F802, AV-36F702, AV-32F802, AV-32F702, AV-27F802, AV-27F702

Medion MD-7078VTS Service Manual preview
MD-7078VTS
Бренд: Medion Страницы: 43
Noblex 21TC655F Service Manual preview
21TC655F
Бренд: Noblex Страницы: 48
RCA RLDED4079A-SM Instruction Manual preview
RLDED4079A-SM
Бренд: RCA Страницы: 41
Magnavox 20MS334R - 20" Real Flat Owner'S Manual preview
20MS334R - 20" Real Flat
Бренд: Magnavox Страницы: 36
Grundig LENARO 27 User Manual preview
LENARO 27
Бренд: Grundig Страницы: 35
Majestic TM1510USA Instruction Manual preview
TM1510USA
Бренд: Majestic Страницы: 28
Haier LE32C430 Owner'S Manual preview
LE32C430
Бренд: Haier Страницы: 17
Haier LE42D10FM User Manual preview
LE42D10FM
Бренд: Haier Страницы: 24
Haier LE20F6500 User Manual preview
LE20F6500
Бренд: Haier Страницы: 16
Haier LC-2710D Operating Instructions Manual preview
LC-2710D
Бренд: Haier Страницы: 14
Haier LE24F6550 User Manual preview
LE24F6550
Бренд: Haier Страницы: 17
Haier LC-2610D Operating Instructions Manual preview
LC-2610D
Бренд: Haier Страницы: 13
Haier LE32K6000D Owner'S Manual preview
LE32K6000D
Бренд: Haier Страницы: 28
Haier LT19K3CW2 User Manual preview
LT19K3CW2
Бренд: Haier Страницы: 34
Haier LE32B9000 User Manual preview
LE32B9000
Бренд: Haier Страницы: 17
Haier LE40T3 User Manual preview
LE40T3
Бренд: Haier Страницы: 37
Haier L37K30B User Manual preview
L37K30B
Бренд: Haier Страницы: 25
Haier L37A6A-A1 User Manual preview
L37A6A-A1
Бренд: Haier Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды