1-18 (No.YA093)
4.6.1 TOOL OF SERVICE MODE OPERATION
Operate the SERVICE MODE with the REMOTE CONTROL UNIT.
4.6.2 SERVICE MODE ITEMS
In general, basic setting (adjustments) items or verifications are performed in the SERVICE MODE.
4.6.3 HOW TO ENTER THE SERVICE MODE
(1) Set the SLLEP TIMER to 0 minutes using the [SLEEP
TIMER] key.
(2) Press the [VIDEO STATUS] key and [DISPLAY] key
simultaneously, then enter the SERVICE MODE mode.
(3) When the main menu is displayed, press any key of the [0]
to [9] key to enter the corresponding sub menu mode.
NOTE:
Before entering the SERVICE MODE, confirm that the setting
of TV / CATV switch of the REMOTE CONTROL UNIT is at the
"TV" side and the setting of VCR / DVD switch is at the "VCR"
side. If the switches have not been properly set, you cannot
enter the SERVICE MODE.
4.6.4 HOW TO STORE OF SETTING VALUE
When adjustment is completed, press the [MUTING] key to
memorize the adjustment value. If not to do it, adjustment data is
not memorized to the memory IC. And if exit the adjustment
mode before memorize the data, the adjustment value which you
change is canceled.
4.6.5 HOW TO EXIT THE SERVICE MODE
Press the [BACK] key to exit the SERVICE MODE.
1.PICTURE/SOUND
This sets the setting values of the Video / Audio / Defrection circuits.
2.YC SEP
This is used when the YC separation circuit is adjusted.
[Do not adjust]
3.WHITE BALANCE
This sets the setting values of the WHITE BALANCE.
4.MEMORY SETUP
This sets the setting values of the MEMORY ADDRESS.
[Do not adjust]
5.RF AFC
This is used when the IF VCO is adjusted.
[Do not adjust]
8.IP
This sets the setting value of the DIST circuit.
[Do not adjust]
9.DSD
This sets the setting value of the DSD (Digital super detail) circuit.
[Do not adjust]
0.HDMI
This sets the setting value of the Digital input circuit.
[Do not adjust]
.
SERVICE MODE SELECT KEY
POWER
VCR/DVD
switch
NUMBER
DISPLAY
VOL -
TV/CATV
switch
MENU
SLEEP
TIMER
VIDEO
STATUS
RM-C1257G
CH +
VOL +
CH -
BACK
Содержание AV-32S565 Series
Страница 1: ......
Страница 107: ...2 35 No YA093 FRONT PATTERN DIAGRAMS MAIN PWB PATTERN SOLDER SIDE ...
Страница 108: ... No YA093 2 36 ...