AV-29LS
AV-29LX
AV-29LH
AV-2908TEE
22
No. 51839
Item
Measuring
instrument
Test point
Adjustment part
Description
Adjustment
of
SUB TINT-
I
Remote
control unit
6. TINT
[Method of adjustment without measuring instrument]
Notes:
• Proceed to the following this adjustment after having completed the
adjustment of SUB CONT.
• Set PICTURE MODE (VSM) to “BRIGHT”.
– NTSC 3.58 TINT –
1. Receive a NTSC 3.58 colour bar signal (full field colour bar 75%
white).
2. Press the COLOUR SYSTEM button on the remote control unit to
select the NTSC 3.58 colour system.
3. Select
2. VC
from the SERVICE MENU.
4. Select
6. TINT
with the MENU
&
/
^
key.
5. Set the initial setting value of NTSC 3.58 with the MENU –/+ key.
6. If you cannot get the best tint with the initial setting value, make fine
adjustment until you get the best tint.
7. Press the DISPLAY key twice to return to the normal screen.
– NTSC 4.43 TINT –
When adjustment is done for NTSC 3.58 TINT,appropriate val-
ues are automatically set for NTSC 4.43 TINT.
Mg
B
(–)
0V
(+)
R
Cy
Y
W
(B)
G
Adjustment
of SUB
SUB TINT-
II
Signal
generator
Oscilloscope
Remote
control unit
6. TINT
[Method of adjustment using measuring instrument]
Notes:
• Proceed to the following this adjustment after having completed the
adjustment of SUB CONT.
• Set PICTURE MODE (VSM) to “BRIGHT”.
– NTSC 3.58 TINT –
1. Receive a NTSC 3.58 colour bar signal (full field colour bar 75%
white).
2. Press the COLOUR SYSTEM button on the remote control unit to
select the NTSC 3.58 colour system.
3. Select
2. VC
from the SERVICE MENU.
4. Select
6. TINT
with the MENU
&
/
^
key.
5. Set the initial setting value of NTSC 3.58 with the MENU –/+ key.
6. Connect the oscilloscope between TP-47G and TP-E.
7. Adjust NTSC 3.58 TINT to set the value
(B)
in the figure to
+0V (V
W-
cy
)
.
8. Press the DISPLAY key twice to return to the normal screen.
– NTSC 4.43 TINT –
When adjustment is done for NTSC 3.58 TINT,appropriate val-
ues are automatically set for NTSC 4.43 TINT.
TP-47G
TP-E (
H
)
[CRT
SOCKET
PWB]