background image

36

INSTALL

AV-32/28X5SU/BU / LCT1797-001A-U / English

3 Press the 

3

 button to choose the 

SYSTEM (broadcasting system) for 

a TV channel you want to register
TV channel (SECAM-L system) 

from a French station:

Set the SYSTEM to “L”. If it is set to one 
other than “L”, you cannot receive the TV 
channel of the SECAM-L system.

Other TV channels:

If you do not know the correct 

broadcasting system, set the SYSTEM to 
“B/G”. If “B/G” is not correct, it results in 
the fact that you will not hear the sound 

normally when the TV detects a TV 
channel. In this case, retry to set the 
SYSTEM again correctly so that no 

problem arises.

4 Press the green or red button to 

search for a TV channel

Scanning stops when the TV finds a TV 
channel. Then the TV channel is 

displayed.

5 Press the green or red button 

repeatedly until the TV channel you 

want appears
If the TV channel reception is poor:

Press the blue or yellow button to fine-
tune the TV channel.

If you cannot hear the normal 

sound even when the picture of the 

TV channel appears normally:

The SYSTEM setting is wrong. Press the 

3

 button and choose a SYSTEM that has 

normal sound.

6 Press the 

a

 button and register 

the TV channel to a Programme 

number (PR)

The normal EDIT menu is resumed.

AV-32&28X5SUBU_Eng.book  Page 36  Wednesday, December 22, 2004  10:15 AM

Содержание AV-28X5BU



















































Отзывы: