SET UP menu
29
ENGLISH
AV-32/28T5SP / LCT1795-001A-U / English
5 Press the green or red button
repeatedly until the TV channel you
want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-
tune the TV channel.
If you cannot hear the normal
sound even when the picture of the
TV channel appears normally:
The SYSTEM setting is wrong. Press the
3
button and choose a SYSTEM that has
normal sound.
6 Press the
a
button and register
the TV channel to a Programme
number (PR)
The normal EDIT menu is resumed.
LANGUAGE
The LANGUAGE setting which was
performed in the “Initial settings” (page 5)
can be changed.
1 Choose LANGUAGE, then press
the
a
or
3
button
A sub-menu of the LANGUAGE function
appears.
2 Press the
5
and
6
buttons to
choose a language. Then press the
a
button
DECODER (EXT-2)
When connecting a Decoder with a T-V
LINK compatible VCR connected to the
EXT-2 terminal, use the DECODER (EXT-
2) function to unscramble the scrambled TV
channels.
1 Turn on the Decoder power
2 Display the TV channel capable of
being unscrambled with the
Decoder on the TV
Even if the Decoder is functioning, a
scrambled picture appears at this time.
3 Display the SET UP menu and
choose DECODER (EXT-2)
4 Press the
5
buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the
5
buttons to choose OFF.
5 Press the
a
button to complete
the setting
The T-V LINK menu appears.
You can send the programme numbers
data to a VCR with the T-V LINK
function.
LANGUAGE
TV
OK
D1002(E)-EN
D0029-EN
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)
EXT SETTING
PICTURE TILT
OFF
TV
OK
D0005-EN
DOWNLOAD TV
RECORDING DEVICE
T-V LINK
TV
OK
EXIT
AV-32&28T5SP_Eng.book Page 29 Wednesday, December 22, 2004 9:38 AM
