ENGLISH
- 10 -
8.
If you do not have a T-V LINK compatible VCR, press
STANDARD
button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2 terminal, press
button to display
T-V LINK
menu. Then follow the operating procedure
Downloading
the data to VCR
on
page 5
to transmit the Programme
table data to the VCR.
To change the Colour system:
If the picture is not clear or no colour appears, choose the
correct colour system to display the picture normally.
1.
Press
or
button to select
COLOUR SYS-
TEM
, then press or button to choose the correct
one.
In TV mode:
PAL
/
SECAM
In AV mode:
AUTO / PAL /
SECAM / NTSC 3.58 / NTSC 4.43
2.
Press
or
to select
STORE
, then press or
button to store it.
3.
When
T-V LINK
menu appears, follow the step 4.
4.
If you do not have a T-V LINK compatible VCR, press
STANDARD
button to exit the menu.
If you have a T-V LINK compatible VCR connected to the
EXT.2
terminal, follow the operating procedure
Down-
loading the data to VCR on
page 5
to transmit the
Programme table data to the VCR.
Decoder(EXT-2)
If you have a decoder connected to a T-V LINK compatible
VCR, which in turn is connected to the EXT.2 terminal, use
DECODER(EXT-2)
to unscramble the scrambled TV chan-
nels.
1.
Exit the menu.
2.
Turn on the decoder power.
3.
Display the scrambled TV channel on the TV. Even if the
decoder is working, a scrambled picture appears.
4.
Display the
INSTALL
menu again.
5.
Press
or
button to select
DECODER(EXT-2)
,
then press or button to set to
ON
6.
Press
or
to select
STORE
, then press or
button to store it.
T-V LINK
menu will appear after the
TV stores the setting.
7.
Follow the operating procedure
Downloading the data
to VCR
on
page 5
to transmit the revised programme
table data to the VCR.
If you do not want to transmit, press
STANDARD
but-
ton to exit the menu.
Note:
You can only use this item if you have a decoder connected
to a
T-V LINK
compatible
VCR
to
EXT.2
terminal. Setting
this item to
ON
by mistake causes the picture/sound of a
TV channel you are currently viewing to disappear.
If this item has been set to
ON
but the TV channel cannot
be unscrambled, check the following:
Has the decoder been connected to the VCR properly ac-
cording to the VCR and Decoder instruction manuals?
Can the TV channel be unscrambled with a decoder?
Do you need to change the VCR settings in order to con-
nect the decoder? Confirm that the VCR is set properly by
rechecking the VCR instruction manual.
Program (Programming) Menu
You can use the Program (Programming) menu to delete a
channel, to change the programme number of a channel, to
give a channel name to a channel, and to start the
AUTO
PROGRAM (AUTOSTORE)
function.
Press
MENU
button to display the main menu.
Press
or
button to select
PROGRAM
item,
then or button to display the
PROGRAM
menu.
To choose a channel in the PROGRAM menu:
Press
/
/ / button. The programme num-
ber that you choose is high-lighted in the
PROGRAM
menu
and you can view the picture of that channel.
Caution:
Using
DELETE
or
INSERT
function rewrite the current
channel list in the
PROGRAM
menu. Therefore, the pro-
gramme numbers of some of channels will change.
When you complete the settings of PROGRAM
menu:
If you have a T-V LINK compatible VCR, press the
but-
ton to display the T-V LINK menu. Then follow the operating
procedure
Downloading the data to VCR
on
page 5
to
transmit the Programme table data to the VCR.
If you do not have a T-V LINK compatible VCR, press
STAN-
DARD
button to exit the menu.
01-ENG-2835-AK45-C1100UK-4-3-(AV-28KT1&BUF&SUF).p65
28.05.2003, 19:56
10
