1-26 (No.YA405)
SUB BRIGHT
adjustment
Remote
control unit
[2. V/C]
4. BRIGHT
Notes:
• Proceed to the following adjustment after having
completed the WHITE BALANCE (Low light) and
WHITE BALANCE (High light) adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
(1) Receive a NTSC broadcast.
(2) Select
2. V/C
from the SERVICE MENU.
(3) Select
4. BRIGHT
.
(4) Set the initial setting value.
(5) If the brightness is not best with the initial setting value,
make fine adjustment until you get the best brightness.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
SUB
CONTRAST
adjustment
Remote
control unit
[2. V/C]
5. CONT
Notes:
• Proceed to the following adjustment after having
completed the SUB BRIGHT adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
(1) Receive a NTSC broadcast.
(2) Select
2. V/C
from the SERVICE MENU.
(3) Select
5. CONT
.
(4) Set the initial setting value.
(5) If the contrast is not best with the initial setting value,
make fine adjustment until you get the best contrast.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
SUB COLOUR 1
adjustment
Signal
generator
Remote
control unit
[2. V/C]
6. COLOUR
[Method of adjustment without measuring instrument]
Notes:
• Proceed to the following adjustment after having
completed the SUB CONTRAST adjustment.
• Set PICTURE MODE (VSM) to "BRIGHT".
- PAL M COLOUR -
(1) Receive a PAL M broadcast.
(2) Select
2. V/C
from the SERVICE MENU.
(3) Select
6. COLOUR
.
(4) Set the initial setting value for PAL COLOUR.
(5) If the colour is not best with the initial setting value,
adjust until you get the best colour.
(6) Press the [DISPLAY] key twice to return to the
normal screen.
- PAL N COLOUR -
When adjustment is done for PAL M COLOUR, appro-
priate values are automatically set for PAL N COLOUR.
- NTSC 3.58 COLOUR -
(1) Receive a NTSC 3.58MHz broadcast.
(2) Press the [COLOUR SYSTEM] key to select the
NTSC 3.58 colour system.
Adjust NTSC 3.58 COLOUR in the same way as for
"PAL COLOUR".
Item
Measuring
instrument
Test point
Adjustment part
Description
