JVC 0802MWMMDWJEM Скачать руководство пользователя страница 23

Страница: 23 / 74

– 20 –

Precautions on CD Playback

This unit has been designed to play back discs bearing the
following logos:

In addition to the above discs, this unit can play back audio
data recorded on CD Text, CD-G (CD Graphics), and
CD-Extra.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back when they are already
“

finalized

.” If you try to play back

unfinalized

discs, “CD

NO DISC” may appear in the main display.
• You can play back your original CD-Rs or CD-RWs

recorded in

audio CD format ONLY

(If CD-RWs have

been recorded in different format, erase all the data on
CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs recorded
with sound files such as MP3.

• Before playing back CD-Rs or CD-RWs, read their

instructions or cautions carefully.

• Some CD-Rs or CD-RWs may not be played back on

this unit because of their disc characteristics, damage or
stain on them, or if the player’s lens is dirty.

Important notices:

• In general, you will have the best performance by

keeping your discs and the mechanism clean.
– Store discs in their cases, and keep them in cabinets or

on shelves.

– Keep the unit’s disc tray closed when not in use.

• Continuous use of irregular shaped discs (heart-shape,

octagonal, etc.) can damage the disc rotating mechanism.

• CD-RWs may require a longer readout time since the

reflectance of CD-RWs is lower than for regular CDs.

Playing Back the Entire CD—Normal Play

Press CD

on the main unit.

The unit automatically turns on, the electronic swing
panel slides downward, then the disc tray comes out.

Place a disc correctly on the circle of the disc tray
with its label side up.

• When using a CD single (8 cm), place it on the

inner circle of the disc tray.

Press CD

The disc tray closes, then the electronic swing panel
slides upward automatically.
The CD indicator starts flashing on the display and disc
playback starts from the first track of the disc.

• If you press CD

instead of CD

, the disc

tray and electronic swing panel close, but disc
playback does not start.

Disc playback stops after playing all the tracks of the
disc.

To stop during play,

press

To remove the disc,

press CD

• After removing the disc, press CD

again to close the

disc tray.

Good

No good

Audio CD

CD Recordable (CD-R)

CD ReWritable (CD-RW)

Disc tray

Electronic swing
panel

CD (disc) indicator

Elapsed playing time

The current track No.

EN19-22UX-Z7MD[A]f

02.7.31, 21:23

Содержание 0802MWMMDWJEM











































































Результаты поиска

Содержание 0802MWMMDWJEM

Отзывы:

Похожие инструкции для 0802MWMMDWJEM

Бренды по названию

Популярные бренды

JVC 0802MWMMDWJEM, Инструкция по эксплуатации

Результаты поиска

Содержание 0802MWMMDWJEM

Отзывы:

Похожие инструкции для 0802MWMMDWJEM

Бренды по названию

Популярные бренды