background image

English

Page 29

From the remote control:

If you have already set the center speaker size following the procedure described on page 14, you can use the
remote control for Dolby Surround preparation.

1. Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH

LOGIC, HALL) lights up on the display.
The previous mode is recalled (at its previous settings) and is shown on the display.
Each time you press the button, the surround mode turns on and off.

2. Press AUDIO CONTROL so that 10 keys work for adjusting the sound.

3. Press SURR MODE until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the

display.
Each time you press the button, the surround modes change as follows:

The indicator of the selected surround mode lights up in turn as you select the surround modes.

4. Press DELAY to adjust the delay time of the rear speaker output.

Each time you press the button, the delay time changes as follows:

Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.

5. Press TEST to start checking the speaker output balance.

“TEST” starts flashing on the display, and a test tone comes out from the speakers in the following
order:

Notes:
• No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
• No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center

mode.

6. If necessary, adjust the speaker output balance as follows:

• To adjust the rear speaker output level, press REAR +/–.
• To adjust the center speaker output level, press /–.

Pressing – decreases the output level up to –10 dB.
Pr increases the output level up to +10 dB.

Notes:
• The sound levels of the left and right rear speakers will be the same.
• You cannot set the sound level of the rear speakers when you have selected “3CHLOGIC.”
• You cannot set the sound level of the center speaker when you select “PHANTOM” or “OFF” for the

center mode.

7. Press TEST again to stop the test tone.

6

SURR MODE

PROLOGIC

3CHLOGIC

HALL

SURROUND

ON/OFF

AUDIO

CONTROL

4

TEST

Left front

speaker

Center

speaker

 Rear

speakers

Right front

speaker

DELAY 1

DELAY 2

DELAY 3

8

9

+

REAR

10

+10

+

CENTER

4

TEST

5

DELAY

RX-530RBK(EF)_0021-001A_En

97.4.24, 0:31 PM

29

Содержание 0497OFYOTKJEMEN











































Отзывы: