JVC 0302MNV*ID*JVE, Инструкция по эксплуатации, Страница: 23 / 56

Masterpage:Right-NoTitle0
EN
23
Filename [HRS5950EU2-EN.fm]
Page 23 February 20, 2002 11:23 am
D
Set the tape speed.
Press SP/LP (
p
).
E
Set the VPS/PDC mode.
Press VPS/PDC to select “ON” or “OFF”.
●
If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is
set to ON.
●
If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is
set to OFF.
墌
“VPS/PDC Recording” on page 25.
F
Return to the normal screen.
Press PROG or OK . “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears.
●
Repeat steps 1 – 6 for each additional programme.
G
Engage the recorder’s timer mode.
Press
#
( TIMER ). The recorder turns off automatically and
“
#
” appears on the front display panel.
●
To disengage the timer mode, press
#
( TIMER ) again.
NOTES:
●
To Change The Stop Time . . .
. . . press
STOP +/– after pressing OK in step 3 . You can
compensate for anticipated programme schedule delays.
●
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing
OK in step 3 , press WEEKLY ( number key
“ 9 ”) for weekly serials or DAILY ( number key “ 8 ”) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, “PROGRAM FULL” appears on the TV screen. To record
the extra programme, you must first cancel any unnecessary
programmes (
墌
pg. 26).
●
It is not possible to timer-record a TV programme with a
S
HOW
V
IEW
number which starts with “0”.
●
If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
Satellite Receiver Users
To timer-record a satellite broadcast using the S
HOW
V
IEW
system:
A
Set “L-2 SELECT” to “A/V” (
墌
pg. 31).
B
Perform steps 1 – 7 .
C
Set the satellite receiver to the appropriate channel before
the selected programme begins.
D
Leave the satellite receiver’s power on.
ATTENTION
Guide Program Number Set
“GUIDE PROG SET” appears after performing step 3 if the
Guide Program number for the S
HOW
V
IEW
number you
entered has not been set.
●
Press the number keys or
rt
to input the channel
position number on which your recorder receives that
station, then press
OK or
e
to set the Guide Program
number. The S
HOW
V
IEW
Program screen appears.
(Example)
To timer-record a ZDF
programme with the
S
HOW
V
IEW
system.
* If your recorder receives ZDF on
the channel position 2, press
OK
or
e
after entering “2”.
HRS5950EU2-EN.fm Page 23 Wednesday, February 20, 2002 11:34 AM