background image

G-1

Caution––STANDBY/ON 

 button!

Disconnect the mains plug to shut the power off completely. The
STANDBY/ON 

 button in any position does not disconnect the

mains line. The power can be remote controlled.

Warnings, Cautions, and Others / 

CAUTION

Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)

Do not place any naked flame sources, such as
lighted candles, on the apparatus.

When discarding batteries, environmental problems
must be considered and local rules or laws governing
the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.

Do not remove screws, covers or cabinet.

2.

Do not expose this appliance to rain or moisture.

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage.
Locate the apparatus as follows:
Front:

No obstructions open spacing.

Sides:

No obstructions in 10 cm from the sides.

Top:

No obstructions in 10 cm from the top.

Back:

No obstructions in 15 cm from the back.

Bottom:

No obstructions, place on the level surface.

In addition, maintain the best possible air circulation as illustrated.

Wall or obstructions

Front

Stand height 15 cm or more

RX-5052S

Spacing 15 cm or more

Floor

Safety_RX-5052S[US]2.p65

05.1.7, 5:13 PM

1

Содержание 0105RYMMDWJEIN




































Отзывы: