EASY
INST
ALL
LIDO
1
2
0
3
8.
9.
7.
Install the light unit and connect it to the
power supply. Place the cover hatches
on the lamp to prevent condensation
from escaping.
If necessary, remove the protective film from the filter media and rinse them carefully under running water. Fill the filter baskets
with the filter media as instructed. First insert the lower and then the upper filter basket, with the filter media inserted in the
correct order, into the filter housing. Insert the circulating pump and the heater into the openings provided in the filter. Finally,
place the filter cover on the filter and connect the electrical equipment to the power supply.
The run-in period of the filter may last 6 - 8 weeks. You may increase the number of fish
in steps during this time.
Tip:
JUWEL bioBoost
is able to significantly cut the run-in
period in your aquarium. Billions of filter bacteria will be immediately activated when
they come into contact with the water and so enable you to take your aquarium into
operation more quickly. bioBoost is available from your specialist dealer.
14 weeks later with CO
2
JUWEL accessories
JUWEL bioBoost
Filter accelerator
JUWEL EasyFeed
Automatic feeder
JUWEL OxyPlus
O2 diffuser
JUWEL SmartFeed
Premium automatic feeder
JUWEL AQUARIUM AG & CO. KG
| Karl-Göx-Straße 1 | D-27356 Rotenburg/Wümme | GERMANY
Service-H49 (0) 42 61/93 79-32 | Service-Fax +49 (0) 42 61/93 79-856 | [email protected]
INFO:
This set-up video was realised with the help of Adrie Baumann.
Stones and roots: Colorstone | Plants: Tropica Aquarium Plants
www.juwel-aquarium.com