7
6
SAFETY PRECAUTIONS:
1. READ ALL ASSEMBLY, OPERATING INSTRUCTIONS BEFORE USE
2. Please make sure the Rollator is opened fully and the seat frame
is pushed down until it snaps in place.
3. Make sure all knobs, nuts, bolts, pins are fully tightened. Check
regularly to ensure they are secure at all times.
4. Make sure handle bars are in the same height position and Rollator is
level. Make sure push pins on handle bar arms are fully engaged
in respective holes.
5. Test the Rollator for stability before applying full weight.
6. Test brakes before using
7. ALWAYS LOCK BRAKES BEFORE SITTING, please refer to
Operating Instructions #4 (image 8).
8. Replace tires when significantly worn or damaged
9. Caution: Keep hands clear of frame when folding
10. Maximum weight capacity 300 lbs.
4. CHECK HAND BRAKES
• Hand Brakes should be in working order
after assembly
• Check Hand Brakes periodically for proper
function
• Squeeze the Hand Brakes and check to ensure
that the metal brake shoes engage the wheels
and stop the Rollator. (see image 11)
• Push the Hand Brakes DOWN into their locking
position and check to ensure that the metal
brake shoes engage the wheels and stop the
Rollator (see image 11)
5. HAND BRAKE ADJUSTMENT
• Hand Brakes should be in working order after
assembly.
• However brakes can loosen during normal use
TIGHTEN BRAKES
• Place Rollator upright on floor
• Loosen nut at top of brake shoe assembly,
near wheel. Turn
counter-clockwise
until
desired tension is achieved (see image 12)
• Test by squeezing hand brake — ensure that
metal brake shoe fully engages the wheel.
LOOSEN BRAKES
• Place Rollator upright on floor
• Loosen nut at top of brake shoe assembly,
near wheel. Turn
clockwise
until desired
tension is achieved (see image 12)
• Test by squeezing hand brake — ensure that
metal brake shoe fully engages the wheel.
10
11
Call Juvo Products
Customer Service
Toll Free: 1.844.277.6191
with any questions
