BEFORE INSTALLING AND USING THE PRODUCT,
PLEASE READ THE INSTRUCTIONS THOROUGHLY,
AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT OVERVIEW
1.
Micro USB Output Port
2.
Power Button / Capacity Indicator
3.
LED Indicators
4.
USB Charging Port
5.
Lightning Connector Output Port
Included
: (1x) Power Stick and (1x) USB Extension Cable
SPECIFICATIONS
To ensure safe operation, check your device’s
compatibility with Power Stick specifications prior to use
CHECKING POWER LEVELS
USE
Before first use, it is recommended to charge the Power
Stick via the USB Charging Port or the supplied USB
Extension Cable. The Power Stick will take approximately
4 hours to charge 0-100%.
1. Charging the Power Stick:
To Charge, plug the USB Charging Port into any USB
power device, such as a Computer, Laptop, or USB to
AC Adaptor. If needed, use the supplied USB
Extension Cable for easier access when charging.
While charging, the 4 blue LED Indicator Lights will
FLASH to show the power level. When the Power
Stick is fully charged, all 4 LEDs will stop flashing and
stay lit.
See “Checking Power Levels”.
2. Charging Your Smartphone, Etc:
If your device uses an Apple
®
Lightning
™
cable or
Micro USB cable, plug your smartphone, tablet or
other USB powered device into the appropriate
Output Port of the Power Stick. Press the Power
Button on the Power Stick to begin charging your
device (LEDs will stay lit during charging). Charging
will continue until your device is fully charged or the
Power Stick has drained. To manually stop charging,
simply disconnect your device.
Please Note: When using both connectors (Lightning and
Micro USB) at the same time, the Power Stick will charge
the Apple device as first priority. After fully charging the
Apple device, the Power Stick will charge the other device.
PLEASE NOTE
• The Power Stick comes pre-packaged with a partial
charge, NOT a full charge. We recommend fully charging
your Power Stick before first use for best performance.
• The Power Stick’s LED Indicator represents the
estimated power levels. Actual charge may vary.
• If your device (smartphone, tablet, etc.) is not charging,
this may be a sign that the battery level of the Power
Stick is very low and you need to recharge it.
• It is normal for the Power Stick to become slightly
warm during use.
MAINTENANCE
In order to keep your Power Stick operating at maximum
potential, please follow these guidelines:
1.
Recharge the Power Stick every 2 months when not in
use. Charge to at least 40%, as this will extend the
battery life.
2.
Keep your Power Stick dry and away from moist and
corrosive materials. DO NOT get wet. In addition,
never expose to high heat environments. Avoid
extreme temperatures of hot or cold as it will decrease
the overall battery performance.
CAUTIONS
Please read this section carefully before using.
• Only use this product with confirmed power sources
that follow device specifications. Device is intended to
be used with iPhone
®
, mobile phones and other digital
products. Only use specified charging methods or
reputable branded chargers that are compatible with
specified device specifications.
• Do not use product beside or in close proximity to a
heat source such as a ventilation heat vent, convection
heater, burner, etc.
• Do not expose device to moisture or submerge it in
liquid. Do not leave device inside an excessively hot or
cold environment. Store device in a cool and dry
environment at all times.
• Avoid dropping or applying excessive shock and force
to device. Do not use in unprotected outdoor
environments or in exposed sunlight for a prolonged
period of time.
• Do not use device in a confined space. Restricted or
insufficient airflow will put device at risk of overheating.
• Avoid touching metal prongs when plugging and
unplugging device from power source.
• Do not use harsh chemicals to clean device. Use a damp
cloth with warm water to wipe off any dirt. Only clean the
device when it is unplugged from any power source.
• Ensure charge port is clear of any foreign objects
before using. Do not force incompatible connectors
into any port.
• Do not used damaged cables and wires with device.
• Do not attempt to disassemble the device. Any
attempts to do so will void all warranties on this
product. Do not attempt to remove or salvage
batteries for other purposes.
SAFETY INSTRUCTIONS
Read all instructions and warnings prior to using this
product. This device contains a Lithium Ion (Li-ion)
Battery. Improper use, storage and disposal may cause
leaks, expansions and explosions that could lead to fires,
health concerns, bodily injury and property damage.
• Upon the event where the device may be broken,
shattered, or in any way physically compromised DO
NOT USE.
• Do not dispose device into standard garbage disposal
sites. Dispose of device at available Battery Recycling
Sites after fully discharging battery. Not doing so may
violate local disposal laws and regulations.
• NOTE: Opening of product and/or removal of battery
will render product inoperative and voids manufacturer
warranties, dispose of remaining product components
in accordance with local laws.
• If unusual expansion is detected, disuse device
immediately. In case of fire, use lithium approved
“Class D Type” Fire Extinguishers on device.
• Do not expose or dispose of device into fire.
• In the unfortunate case of a leak and electrolyte comes
in contact with skin, wash area with water and soap.
If electrolyte makes contact with eyes, flush with
generous amounts of water for 15 minutes and seek
medical attention immediately. Avoid inhaling fumes if
applicable. Do not attempt to reuse damaged device.
• Do not charge device with unspecified power source.
Only use specified method of charge and reputable
brand OEM chargers compatible with device
specifications.
FCC STATEMENT
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user authority to operate the
equipment.
NOTE:
This equipment has been tested and found to
comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on.
The user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
CALIFORNIA PROP 65 WARNING
WARNING:
This product contains chemicals known to
the State of California to cause birth defects or other
reproductive harm. For more information on these
regulations and a list of chemicals, log on the following
website address:
http://www.oehha.ca.gov/prop65.html
INNOVATIVE TECHNOLOGY ELECTRONICS CORP.
LIMITED WARRANTY: 90 DAYS LABOR, ONE YEAR PARTS
Innovative Technology Electronics Corp. (IT) warrants the product to be free from
“Defects” in materials under normal use for a period of “One Year” from the date of
the original purchase. The Warranty is “Not” transferable. IT agrees, within the
initial “90 Day” period, to repair or replace the product if it is determined to be
defective at “No Charge”. It is further agreed that IT will cover the cost to repair or
replace damaged “Parts” only for a total period of “One Year” from the date of the
original purchase. The warranty does not cover cosmetic damage, antennas, AC
cords, cabinets, headbands, ear-pads, or damage due to line power surges,
connection to improper voltage supply or settings, misuse, mishandling, accident,
acts of God or attempted repair by an unauthorized service agent.
To obtain service, the purchaser MUST present an original sales receipt / proof of
purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return
Material Authorization) number to return products for service or replacement. Returns
without an RMA number on the package will be refused and returned to sender.
Upon receipt of the returning item and our full inspection (IT) may issue a
replacement to customer for the same item or of one that has equivalent value and
features. To return an item, supply full name, return address, phone number, item
purchased, receipt of purchase and reason for return to obtain RMA number.
All returns must be in the original packaging or reasonable substitute to prevent
damage. Customer “Must” include full name, shipping address and telephone
number inside of package. No return will be shipped back to a PO Box or
APO address.
Please include your check or money order in the amount of:
•
USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
•
USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit)
•
USD$16.00, for items $100.00 and up. (Price Paid Per Unit)
•
Shipping fees are non-refundable
To be payable to Innovative Technology Electronics Corp.(for handling and return
shipping charges) (IT) will not be responsible for delays or unprocessed claims
resulting from a purchaser’s failure to provide any / all of the necessary
information. Send all inquiries or RMA request via our website:
www.ithomeproducts.com/support.
Innovative Technology Electronics Corp.
1 Channel Drive, Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support
There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives you specific
legal rights and you may also have other rights, which vary from state to state.
NOTE: As a result of continual improvements, the
design and specifications of this product are
subject to change without notice.
Apple and iPhone are trademarks of Apple Inc., registered in the U.S.
and other countries. Lightning is a trademark of Apple Inc.
Smartphones and Tablets are NOT included.
CAN ICES-3 (B) / NMB-3 (B)
8
9
Made in China.
