Just Wireless BTK-729, Руководство пользователя

Страница: 4 / 11

4 5
ChArging your heAdset
Your Just Wireless® Bluetooth® Headset comes with a built in rechargeable battery, and must be
fully charged before using. use the supplied uSB Cable to charge your headset by plugging it into the
charging jack shown below.
•
The red LED light will flash
when you have a low battery
level. it is suggested to
charge the headset at this time.
•
The red light will illuminate solid red during charging and will turn solid blue
when fully charged. it will take approximately 1-2 hours to charge.
•
Your headset cannot be used while charging.
turning the heAdset on And oFF
on mode : Press and hold down the Main Button for 3 seconds. Your headset will beep and the blue
LED light will flash 4 times. now your headset is on.
off mode : Press and hold down the Main Button for 4 seconds. You headset will beep and the red
LED light will flash 2 times. now your headset is off.
standby mode : To save battery power, your headset will automatically change to standby mode
when not in use. The blue LED light will flash every 7 seconds. The headset will automatically change
back to on mode, when a call is incoming, or when the Main Button is pressed.
g E T T i n g S T A R T E D