Jura WE6 Professional, Инструкция по эксплуатации

Страница: 21 / 40

21
4 Permanent settings in programming mode
In the programme item ‘3/5’ / ‘Expert mode’ you can make individual
settings for all speciality coffees and hot water. The following per-
manent settings can be made:
Product Coffee
strength Amount Temperature
‘Ristretto’ ,
‘Espresso’
8 levels Water: 15 ml – 80 ml normal, high
‘Coffee’ ,
‘Special’
8 levels Water: 25 ml – 240 ml normal, high
‘2 ristretti’ ,
‘2 espressi’ ,
‘2 coffees’
– Water: The amount set for the single
product is doubled. as for single product
‘Hot water’ – Water: 25 ml – 450 ml low, normal, high
Permanent settings in programming mode always follow the same
model.
Example:
Proceed as follows to change the coffee strength for one
coffee.
T Press the ‘ P ’ button.
T Press the ‘ > ’ button several times until ‘3/5’ is displayed.
T Press the ‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the ‘ > ’ button (bottom right).
T
Press the ‘Coffee’ button.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ and the coffee strength is displayed.
T Press the ‘ < ’ or ‘ > ’ button to change the setting for the cof-
fee strength.
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘  ’ button for around 2 seconds to exit program-
ming mode.
Adjusting the product
settings