Jura IMPRESSA XS90, Руководство пользователя

Страница: 51 / 64

51
6 Maintenance
T
Place a receptacle under the coffee and hot water spout and
another under the frother.
c T
Press the maintenance button.
DECALCS
, water flows out of the frother and the hot water
spout.
The process is interrupted,
HEATING UP
.
MACHINE RINSING
, water flows out of the coffee
spout. The operation stops automatically,
EMPTY TRAY
.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
The descaling operation is now complete. Your IMPRESSA
heats up and is once again ready to use.
E
If the descaling operation stops unexpectedly, rinse the water
tank thoroughly.
You can initiate the ‘Descaling the machine’ operation manually.
Precondition :
COFFEE READY
is shown on the display and the
filter is not activated.
T
Open the cover of the Rotary Switch.
k T
Keep the Rotary Switch pressed until
MAINTENANCE
appears.
k T
Press the Rotary Switch to enter the programme item.
CLEAN CAPPUCCINO
g T
Turn the Rotary Switch until
DECALCIFY MACHINE
is displayed.
k T
Press the Rotary Switch.
DURATION 45 MIN.
/
START YES
T
Continue with the
second
prompt to take action (indicated
by a
T
), as is described under
‘Descaling following a prompt’.
E
This chapter applies to the Professional and Easy Cappuccino
Frothers.
Each time milk has been prepared the IMPRESSA displays a prompt
for Cappuccino rinsing.
It can be set in programming mode whether the rinsing prompt is
displayed
immediately or 10 minutes after preparation (refer to
Chapter 5 ‘Permanent settings in programming mode – Rinses’).
Manual descaling
Rinsing the cappuccino
frother