Jura IMPRESSA F50 Classic, Инструкция по эксплуатации

Страница: 31 / 45

19
15.1 Buttons programme item
With the BUTTONS programme item you can enter
individual settings for all speciality coffees, milk and hot water.
Permanent settings in programming mode always follow the
same model.
The following permanent settings can be made for speciality coffees,
milk and hot water:
Product Amount of water Strength Temperature
1 espresso 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 espressi 25 ML – 240 ML NORMAL, HIGH
1 coffee 25 ML – 240 ML MILD, NORMAL, STRONG, XSTRONG NORMAL, HIGH
2 coffees 25 ML – 240 ML NORMAL, HIGH
Milk 3 – 120 SEC
Hot water 25 ML – 450 ML
For example:
Proceed as follows to change the amount of water for a coffee from
100 ML to 110 ML, to change the strength from NORMAL to STRONG
and the temperature from NORMAL to HIGH.
䡲
Press the Rotary Switch (1) until the following message appears on
the display:
䡲
RINSE
䡲
Turn the Rotary Switch (1) again until the following message ap-
pears on the display:
䡲
BUTTONS
䡲
Press the Rotary Switch (1).
䡲
SELECT
BUTTON
䡲
Press the preparation button for the speciality coffee for which you
want to adjust the amount of water. For example, 1 COFFEE.
䡲
WATER
䡲
Press the Rotary Switch (1).
䡲
For example 100 ML.
䡲
Turn the Rotary Switch (1) to adjust the amount of water as desired.
䡲
For example 110 ML.
䡲
Press the Rotary Switch (1) to save the new amount of water.
䡲
OK
䡲
WATER
䡲
Turn the Rotary Switch (1) further until the next sub-item appears
on the display:
䡲
STRENGTH
䡲
Press the Rotary Switch (1).
䡲
NORMAL
䡲
Turn the Rotary Switch (1) until the following message appears on
the display:
䡲
STRONG
䡲
Press the Rotary Switch (1) to save the change.
䡲
OK
䡲
STRENGTH
䡲
Turn the Rotary Switch (1) further until TEMPERATURE appears on
the display.
䡲
Press the Rotary Switch (1).
䡲
NORMAL
E