15
ADD TABLET
(Fig. 9) /
PRESS RINSE
UNIT CLEANING / PLEASE WAIT
An acoustic signal can be heard.
EMPTY TRAY
Wait for about 10 seconds before you put the drip tray back
in again.
PRESS RINSE
UNIT CLEANING / PLEASE WAIT
An acoustic signal can be heard.
EMPTY TRAY
SELECT PRODUCT
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
14. Descaling
The machine has an integrated de-scaling programme. If you use a
Claris filter cartridge, your machine does not need descaling.
If the machine needs descaling, the report appears on the dis-
play.
You can continue to draw off coffee and hot water/steam and
then run the descaling programme later.
Only run the descaling programme when the machine has
been switched off for at least 2 hours and has cooled down
well. The descaling programme is started with the machine
switched off. Once it has started, the descaling programme
must not be interrupted.
Only use Jura cleaning tablets. They are available from your
Jura dealer.
Switch your machine off with the ON / OFF switch
and leave
it to cool down for 2 hours.
Remove the water tank.
Press the rinsing key for about 3 seconds.
EMPTY TRAY
AGENT IN TANK
Completely dissolve the contents of one blister (2 tablets) in
0.5 litres of water in a vessel and pour the mixture into the
water tank. Put the tank back in again.
AGENT TANK / OPEN TAP / PRESS RINSE
Place a sufficiently large vessel under the pivoting nozzle
(14).
Turn the selector switch for coffee or hot water / steam (13) to
position
and press the rinsing key
.
UNIT DECALCING / PLEASE WAIT
An acoustic signal is heard.
EMPTY TRAY
CLOSE TAP
UNIT DECALCING / PLEASE WAIT
The descaling solution is guided into the drip tray in the interior
of the machine.
An acoustic signal is heard.
EMPTY TRAY
An acoustic signal is heard.
FILL WATER
Rinse the water tank out well and fill it with cold fresh tap
water. Then put it back into the machine again.
Place a sufficiently large vessel under the pivoting nozzle.
E
