2
IMPRESSA C50 – Quick Reference Guide
IMPRESSA C50 – Quick Reference Guide
J
These short instructions do not replace the ‘IMPRESSA C50 Instruc-
tions for Use’. Make sure you read and observe the safety informa-
tion and warnings first in order to avoid hazards.
You can initiate the rinse operation manually at any time.
Precondition:
ESPRESSO
is displayed (example).
T
Place a receptacle under the coffee spout.
O
T
Touch the P symbol for
approximately 2 seconds
until
RINSE
appears on the display.
k
T
Press the Rotary Switch to enter the programme item.
RINSE
k
T
Press the Rotary Switch to initiate the rinse operation.
RINSING
, water flows out of the coffee spout.
The rinse stops automatically.
ESPRESSO
appears on the
display (example).
E
This chapter applies to the
professional fine foam frother
and the
fine foam frother.
To ensure that the fine foam frother always works properly, you
must rinse it with water
after every
milk preparation.
Your IMPRESSA will
not
prompt you to rinse the fine foam frother.
Precondition:
ESPRESSO
is displayed (example).
T
Remove the milk pipe from the milk container or carton.
T
Fill a receptacle with 250 ml of fresh water.
T
Immerse the milk pipe in the receptacle.
T
Place a receptacle under the fine foam frother.
n
T
Touch the Steam symbol.
HEATING
/
STEAM
As soon as the machine has heated up,
STEAM
/
READY
appears, the light segment on the switch lights up.
h
T
Turn the switch to the
m
position.
STEAM
appears and the fine foam frother and the milk
pipe are rinsed with fresh water.
Rinsing the machine
Rinsing the fine foam
frother
Downloaded from
