Jura GIGA X7c Professional, Техническая информация

Страница: 18 / 19

Elektroapparate AG
Technical information
Technical Support
Language
EN
GIGA X7/X7c Professional
Author: Patrik Studer Checked: Approved: Docu.-name:
Technische_Informationen_GIGA_X7_EN.doc
L:\Geräte\GIGA\Giga_X7\Schulungs_Unterlagen\E\Technisch
e_Informationen_GIGA_X7_EN.doc
Date: Rev. A: Rev. B: Rev. C: Rev. D: Rev. E: Rev. F:
18.11.2011 18.03.2012 12.09.2012 10.12.2012 21.05.2013
Page 18/19
16 Error messages:

If there is a malfunction, an error message as described below is shown on the display:
Display Designation
ERROR 1 COFFEE: Temperature sensor notify “value below tolerance”
ERROR 2 COFFEE: Temperature sensor notify “value above tolerance”
ERROR 3 STEAM: Temperature sensor notify “value below tolerance”
ERROR 4 STEAM: Temperature sensor notify “value above tolerance”
ERROR 9 Heating up not possible
ERROR 10 No HALL sensor impulses Grinder Left (II)
ERROR 11 No HALL sensor impulses Grinder Right (I)
ERROR 12 Initialisation of Grinder Left (II) not possible
ERROR 13 Initialisation of Grinder Right (I) not possible
ERROR 14 Initialisation of CAPPU stepping-motor not possible
ERROR 15 Initialisation of stepper motor Ventilation flaps not possible
ERROR 16 “Positioning” / “Initialisation” of ceramic multi valve not possible
ERROR 17 “Positioning” / “Initialisation” of brewing unit not possible
ERROR 19 Heating was too hot (mains interferences received)