41
5 Maintenance
You can perform coffee system rinsing at any time.
Precondition:
‘Please select product:’
is displayed.
T
Place a receptacle under the dual spout.
O
T
Press the P button.
‘Maintenance status (1/5)’
T
Press the
‘Rinse the coffee system’
button.
‘Machine is rinsing.’
, water flows out of the dual spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
Depending on the setting in programming mode, the GIGA
prompts you to rinse the milk system or automatically performs
rinsing following milk preparation.
Example:
Proceed as follows to rinse the milk system when
prompted to do so.
Precondition:
‘Rinse the milk system.’
and the symbol
c
are
displayed.
T
Place a receptacle under the dual spout.
O
T
Press the P button.
‘Maintenance status (1/5)’
T
Press the
‘Rinse the milk system’
button.
‘Milk system is being rinsed.’
, water flows out of the dual
spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
To ensure that the milk system in the dual spout always works
properly, you must clean it
daily
when you have been preparing
milk.
Non-recommended cleaning agents will not optimally remove milk
residues. This may cause the cappuccino frother to become blocked
and fly off the machine. Discharge of hot steam.
T
Use only original JURA milk system cleaner.
Rinsing the coffee system
Rinsing the milk system
Cleaning the milk system
J
WARNING
