13. FROTHING and STEAMING
The steam function can be used to heat up any liquid and to
steam and froth milk.
Steaming Position:
The Frother's metal cylinder is in the UP position (Fig. 16). In the
steaming position hot steam is injected into the milk (or any
other liquid) without creating a frothy layer on top.
Typically a Latte has steamed milk with no froth.
Frothing Position:
The Frother's metal cylinder is in the DOWN position (Fig. 16). In
the frothing position hot steam and air is injected into the milk
creating warm milk and a firm layer of tiny froth bubbles.
14. HEATING AND FROTHING MILK
READY
–
HEATING
-
STEAM READY
-
60 SEC
-
CLOSE TAP
• Push the Steam button (Fig. 3g). Display shows
HEATING
.
• Add cold milk to a pitcher or a cup.
• After 15 to 30 seconds the display shows
STEAM READY
.
• Immerse the tip of the frother into the milk (Fig 17&18) and
turn the Steam/Water Selector to the Water/Steam Symbol.
Hot steam will be injected into the milk. The display shows
how long steam will be forced through the frother,
60 SEC
.
• At this time you can change the steam output from 3 and 120
seconds. The machine will remember your last setting. When
the selected steam time is up, the display shows
SHUT TAP
.
• Turn the Steam/Water Selector to the cup symbol. If you need
more steam turn the Selector back to the water/steam symbol.
Please note:
You can always stop the steam output by turning
the Steam/Water Selector to the cup symbol.
Please note:
When you start steaming, some hot water will
push out of the nozzle before the steam begins. When frothing
a lot of milk this will not change the taste of your frothed milk.
You can also release this small amount of hot water into the
tray or into a separate container:
• Turn the Steam/Water Selector to the Water Symbol for one
second and then back to the Cup symbol. Now start
frothing/steaming.
Please note:
When you stop the steam output the display will
show
STEAM READY
for the next 20 seconds. Within this
time you can continue to use the steam function.
If you want to steam at a later time you must first press the
Steam button (Fig. 3g).
Tips for frothing (Cappuccino):
The tip of the frother should not touch the bottom of your pitcher.
Start in the steaming position – cylinder "up" (Fig. 16) – for a few
seconds. Then push the cylinder "down". Milk froth will build up.
This way the froth on top of your milk is also warm.
Hotter milk?
If the frothed milk is not warm enough, continue in
the steaming position.
Steaming and frothing directly in your cappuccino cup:
With practice, you can steam and froth directly in your cappuccino
cup. First steam and froth the milk, then add your espresso shot.
Please note:
The less fat content the milk has the more froth will
be created.
Skim milk
will produce the most froth and will let
you taste more of the coffee. 1% and 2% milk will give you less
froth.
Regular whole milk
(3% fat) will produce the least amount
of froth. You can also use soy milk.
14.
