Jura Capresso IMPRESSA 68192 Скачать руководство пользователя страница 28

Страница: 28 / 32

17. DECALCIFYING

The machine has an integrated decalcifying program. This
program takes 45 minutes. When the display shows

READY /

DE-SCALE

it is time to decalcify the machine. The Rinse button

is illuminated. You can still make coffee. It is recommended to
decalcify the machine within the next 3 to 4 days.

Please note

: If you use the Clearyl water cartridge and the

display shows

READY / DE-SCALE

your cartridge function was

not activated. Follow the instructions in chapter 13a to activate
the Clearyl cartridge. If the cartridge is in use for several weeks
install a new cartridge.

Important

: The decalcifying program must not be interrupted.

NOTE

: Only use our special, square decalcifying tablets

Model # 66281, see chapter 20.

CAUTION

: Never use vinegar or any other decalcifying agent.

This might damage internal parts of the machine.

CAUTION

: Immediately remove any splashes of the decalcifying

solution from sensitive surfaces, such as natural stone or wood.

CAUTION

: If the decalcifying solution comes in contact with the

skin, rinse it off with water. If the solution comes in contact with
your eyes, see a doctor.

Important

: Always wait until the decalcifying solution in the

water tank has been used up. Do not fill additional decalcifying
solution into the water tank.

17.1 DECALCIFYING PROCEDURE

1. Push the Rinse button, display shows

EMPTY TRAY

2. Remove and empty the tray and the used coffee container

and replace, display shows

AGENT IN TANK

Attention

: If the tray and the used coffee container are

empty, you must remove the tray for approx. 20 seconds
and then replace it.

3. Remove the frothXpress system from the Auto Cappuccino

system.

4. Remove the water container and empty.
5. Completely dissolve 3 of the large square decalcifying

tablets in a container with 18 oz. of water (0.5 liters) and
pour the solution into the water tank.

6. Replace water tank.

AGENT IN TANK

. The Rinse button

illuminates.

7. Place a large container under the Auto Cappuccino system

(Fig. 18).

8. Push the Rinse button. The display shows

DE-SCALING

and

the light in the Rinse button flashes during the operation.
The machine pumps the decalcifying solution in intervals
through the Cappuccino system.

9. When display shows

EMPTY TRAY

, remove and empty the

container. Then carefully remove and empty the tray and
the used coffee container and replace.

10. Display shows

FILL WATER TANK

. Remove the water tank,

rinse thoroughly, fill it halfway with fresh water and replace.
The display shows

PRESS RINSE

11. Place the container under the Auto Cappuccino system and

push the Rinse button

DE-SCALING

12. The machine pumps fresh water through the system and

stops automatically. The display shows

EMPTY TRAY

13. Remove and empty the container. Then carefully remove

and empty the tray and the used coffee container and
replace.

READY

14. Attach the frothXpress system to the steam nozzle.

28.

Содержание IMPRESSA 68192

































Результаты поиска

Содержание IMPRESSA 68192

Отзывы:

Похожие инструкции для IMPRESSA 68192

Бренды по названию

Популярные бренды

Jura Capresso IMPRESSA 68192, Инструкция по эксплуатации и гарантия

Результаты поиска

Содержание IMPRESSA 68192

Отзывы:

Похожие инструкции для IMPRESSA 68192

Бренды по названию

Популярные бренды