JUPITERBIKE DISCOVERYx7, Руководство пользователя

Страница: 7 / 49

7
1: Lift the quick-release lock
from the handlebar holder and
remove the lower screw.
2: Set aside the nut and gasket but
leave screw in place.
3: Place the handle bar inside the
holder, then close the holder
allowing the screw to come
through the bottom hole.
4: Adjust handlebar angle and
position to your preference.
Then reinstall the nut and
gasket to tighten.
INSTALLING THE HANDLE(IF NEEDED)