Jupiter Fusion Catalyst 4000, Руководство по началу работы

Страница: 11 / 54

Chapter 1—Introduction
Fusion Catalyst 4000 Getting Started Guide 1
1. Introduction
This Getting Started Guide will provide instructions on setting up the
Fusion Catalyst 4000 Wall Controller. It will cover from opening the box to
getting the wall up. This guide is meant for those people who are already
familiar with Jupiter equipment. Please refer to the full manual for detailed
instructions on installing and using this equipment.
Please refer to the Fusion Catalyst 4000 Hardware Manual and
ControlPoint Software Manual.
1.1 Finding What You Need
There are four (4) basic sections in the guide:
• The Fusion Catalyst 4000 System
• Hardware Setup
• Configuring Network
• Software Setup
These sections are enumerated in the upper right of every page to make
‘thumb searchers’ easy and fast. The Table of Contents on page iii lists
all major and minor subject headings in an outline form.