Jupiter Fusion Catalyst 4000 Скачать руководство пользователя

Страница: 3 / 54

Copyright

Fusion Catalyst 4000 Getting Started Guide

iii

Copyright

Notice of Regulatory Compliance

Note: This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency (RF) energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case users will be

required to correct the interference at their expense. The user is cautioned that changes or modifications

not expressly approved by Jupiter Systems can void the user’s authority to operate this equipment. The

entire risk of the use or the result of the use of this Hardware and Software and documentation remains

with the User. Information in this document is subject to change without notice. No part of this document

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in

any form or by any means, electronic or mechanical, including photocopying without express written
permission of Jupiter Systems. See also

“Statement of Limited Warranty” on page v.

Note: This product is intended for use on the following power systems: TN, IT (for Norway).

Acknowledgements

Jupiter Systems®, Jupiter logo®, and PixelNet® are registered trademarks of Jupiter Systems. Fusion

Catalyst™, SVS-8™, and ControlPoint™ are trademarks of Jupiter Systems.

All non-Jupiter brands and names are the property of their respective owners.

Jupiter Systems
31015 Huntwood Avenue
Hayward, CA 94544-7007
510-675-1000 (v)
510-675-1001 (f)
[email protected]
[email protected]
510-675-1007 (v)

Содержание Fusion Catalyst 4000























































Результаты поиска

Содержание Fusion Catalyst 4000

Отзывы:

Похожие инструкции для Fusion Catalyst 4000

Бренды по названию

Популярные бренды

Jupiter Fusion Catalyst 4000, Руководство по началу работы

Результаты поиска

Содержание Fusion Catalyst 4000

Отзывы:

Похожие инструкции для Fusion Catalyst 4000

Бренды по названию

Популярные бренды