JUPITER AVIONICS TEMPLATE AUTOCAD PORTRAIT SIZEA REV B.DWT
TITLE
APPROVED
PREPARED
CHECKED
L00N3
NCAGE CODE
PART NO.
SHEET
DOC NO.
CONFIDENTIAL & PROPRIETARY
TO JUPITER AVIONICS CORP.
Control Panel - NVG
Interconnect Notes
JCP3-N01
1/3
JCP3-N01 Interconnect Rev A.dwg
TAT/CPM
JCP3-N01 INTERCONNECT WIRING NOTES
NOTES
ALL WIRE SIZE SHOULD BE 24 AWG MIN UNLESS OTHERWISE SPECIFIED. UNSHIELDED WIRE
SHOULD BE SELECTED PER FAA AC43.13-1B CHANGE 1 PARA 11-76 TO 11-78. WIRE TYPES
SHOULD BE IN ACCORDANCE WITH MIL-W-22759 AS DESCRIBED IN FAA AC43.13-1B CHANGE 1
PARA 11-85 AND 11-86 AND LISTED IN TABLE 11-11 OR 11-12. ALL SHIELDED CABLE SHOULD BE IN
ACCORDANCE WITH MIL-DTL-27500 (REVISION H OR LATER).
CONNECTION TO AIRFRAME GROUND SHOULD BE MADE WITH 20 AWG WIRE. LENGTH NOT TO
EXCEED 3 FT (0.91 M).
CABLE SHIELDS AT THE CONNECTOR PINS SHOULD BE TERMINATED TO AIRFRAME GROUND
USING A TAG RING P/N: MS27741-5 OR EQUIVALENT.
GROUND PIN TO ILLUMINATE ANNUNCIATOR ON FACEPLATE.
MOMENTARILY GROUND PIN TO RESET CONTROL PANEL.
ONLY CONNECT ONE OF 28 VDC OR +5 VDC LIGHTS INPUT.
FOR MUSIC INPUT, CONNECT MODE SELECT TO GROUND THROUGH 3.5MM MALE CABLE
CONNECTOR RING 2.
THE FRONT PANEL MUSIC INPUT SHALL NOT BE CONNECTED TO ANY OTHER AUDIO INPUT.
2
1.
3
4
CONNECTOR PIN LEGENDS
LEGEND
SPARE
INTERNAL CIRCUITS MAY EXIST AND MAY BE ACTIVATED FOR FUTURE USE. NO EXTERNAL
WIRE CONNECTION.
N/C
NO CONNECTION
5
6
7
8
JAC
CPM
09-14-17
JAC
KDV
09-14-17
