![Jupiter Avionics JA95-N60 Скачать руководство пользователя страница 16](http://html.mh-extra.com/html/jupiter-avionics/ja95-n60/ja95-n60_installation-and-operating-manual_2033799016.webp)
JA95-N60 Audio Controller - Five Transceiver - Expander - NVG
Installation and Operating Manual
Rev A
Page 13
(3)
Transmit Annunciator - TX
This is a deadfront annunciator that will illuminate when
the JA95-N60 is transmitting.
The default legend is ‘TX’, but it is interchangeable to allow customization.
(4)
Transmit Selector
This is a rotary six-position control that is used to
select transmission via one of the five transceivers.
Each of the transmit selector positions is linked by a
white line to the corresponding transmit select
annunciator, transceiver switch and legend.
The appropriate annunciator will light green to show
which transceiver is selected for transmit –
‘AUX3’ in this example.
Note
: Transmission on any of the transceivers linked to the JA95-N60 is only possible if the designated
transceiver (AUX in these examples) is selected on the main audio panel.
(5)
AUX Legend
This is a customizable legend that is intended to remind the
operator which transceiver on the main audio panel must be
selected to allow transmission on the JA95-N60 Expander - NVG
Panel.
The default legend is ‘AUX’, but it is interchangeable to allow customization to match the legend on the main audio
panel.
3.4
Normal Operation Mode
Note
: Numbers in parentheses refer to the front panel controls shown in section 3.2.
The JA95-N60 is in Normal mode when suitable electrical power is supplied to the unit.
3.4.1
Panel Lighting
The legends and annunciators will be illuminated (when appropriate) and dim through the aircraft lighting buss.
3.4.2
Receiving
Note
: Transmission on any of the transceivers linked to the JA95-N60 is only possible if the designated
transceiver (AUX in these examples) is selected on the main audio panel.
When the JA95-N60 receives an incoming transmission on a transceiver or receiver that has been selected, either by
the white transceiver receive switches (
1
) or the transmit selector (
4
), the incoming audio will be directed to the user’s
phones.