JA95-N02 Audio Controller - Six Transceiver - NVG
Installation and Operating Manual
Rev B
Page 12
2.5.3.7
Alerts
Warning
:
The internal audio alerts are intended only to supplement, not replace, airframe alerts such
as ‘low rotor RPM’, ‘engine out’ or ‘decision height alerting’. The alert audio feature is intended for
use as a secondary alerting system where another device provides the primary annunciation.
Audio Files
The JA95-N02 has standard audio signals for each of the two alerts, and the audio files window allows these
signals to be customized with other recordings during the configuration process.
The default Alert signals loaded into the unit at the factory are:
JA95-N02 Wav File (Sine 300Hz 10 sec) Rev A.WAV
JA95-N02 Wav File (Sine 1000Hz 10 sec) Rev A.WAV
Saving new Audio Files
If a new audio file is selected, it may be played using the arrow
to the right of the Message line.
It may be uploaded to the JA95-N02 using the 'Program' menu
and selecting 'Program JA95-N02 Messages…'.
Note that this pane will have different content if a JA95-N02 is
not connected.