JUPITER AVIONICS TEMPLATE AUTOCAD PORTRAIT SIZEA REV B.DWT
TITLE
APPROVED
PREPARED
CHECKED
L00N3
NCAGE CODE
PART NO.
SHEET
DOC NO.
CONFIDENTIAL & PROPRIETARY
TO JUPITER AVIONICS CORP.
Intercom Bus Selector - NVG
Interconnect Notes
JA31-N01
1/7
JA31-N01 Interconnect Rev A.dwg
SRM
JA31-N01 INTERCONNECT WIRING NOTES
NOTES
ALL WIRE SIZE SHOULD BE 24 AWG MIN UNLESS OTHERWISE SPECIFIED. UNSHIELDED WIRE
SHOULD BE SELECTED PER FAA AC43.13-1B CHANGE 1 PARA 11-76 TO 11-78. WIRE TYPES
SHOULD BE IN ACCORDANCE WITH MIL-W-22759 AS DESCRIBED IN FAA AC43.13-1B CHANGE 1
PARA 11-85 AND 11-86 AND LISTED IN TABLE 11-11 OR 11-12. ALL SHIELDED CABLE SHOULD BE IN
ACCORDANCE WITH MIL-DTL-27500 (REVISION H OR LATER).
CONNECTION TO AIRFRAME GROUND SHOULD BE MADE WITH 22 AWG WIRE. LENGTH NOT TO
EXCEED 3 FT (0.91 M).
CABLE SHIELDS AT THE CONNECTOR PINS SHOULD BE TERMINATED TO AIRFRAME GROUND
USING A TAG RING P/N: MS27741-5 OR EQUIVALENT.
CONNECT LOAD TO USER 4 ICS TIE LINE, IF USER 4 AUDIO CONTROLLER IS NOT CONNECTED.
IF A FIFTH USER ICS TIE LINE IS CONNECTED IN PARALLEL WITH USER 3, PINS 8 AND 20 MUST BE
SHORTED TOGETHER.
IF A SIXTH USER ICS TIE LINE IS CONNECTED IN PARALLEL WITH USER 4, PINS 7 AND 19 MUST BE
SHORTED TOGETHER.
WHEN CONNECTING JUPITER AVIONICS AUDIO CONTROLLERS TO A JA31,
CONFIGURE THE AUDIO CONTROLLERS' ICS TIE LINE LOADS AS FOLLOWS:
2 TO 4 AUDIO CONTROLLERS, CONFIGURE AS THREE EXTERNAL LOADS.
5 AUDIO CONTROLLERS, CONFIGURE AS FOUR EXTERNAL LOADS.
6 AUDIO CONTROLLERS, CONFIGURE AS FIVE EXTERNAL LOADS.
2
1.
3
4
CONNECTOR PIN LEGENDS
LEGEND
SPARE
INTERNAL CIRCUITS MAY EXIST AND MAY BE ACTIVATED FOR FUTURE USE. NO EXTERNAL
WIRE CONNECTION.
N/C
NO CONNECTION
5
6
7.
JAC
SRM
02-21-17
JAC
KDV
05-02-18
