Installation Instructions
Step 1.
Remove the T271L fixture from the trac and
place it face up as shown in (Figure 1).
Step 2.
Grasp the lens retaining ring as shown in
(Figure 1), away from the locking dimples.
Step 3.
Rotate the lens retaining ring about 1/8 turn
counterclockwise and remove.
Step 4.
Grasp the cube cell louver/lens holder away
from the locking dimples. Rotate the cube cell
louver/lens holder about 1/8 turn clockwise until
it clicks into place.
SAVE THESE INSTRUCTIONS
1300 South Wolf Road • Des Plaines, IL 60018
PHONE (847) 827-9880 • FAX (847) 827-2925 • www.junolightinggroup.com
© 2012 Juno Lighting LLC Printed in USA Rev 11/12 P3550 pg 2 of 2
INSTALLATION INSTRUCTIONS
Instructions for T271L Cube Cell Louver/Lens Holder
WARNING:
For your safety, read and understand instructions completely before starting installation.
Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.
Note:
Use with non-Juno fixtures voids Juno warranty.
Grasp here
Grasp here
Locking dimple
To remove
Lens Retaining Ring
Figure 1
Cube Cell Louver/Lens Holder
WARRANTY
Juno Lighting, LLC and its subsidiary companies, collectively Juno Lighting Group (JLG), warrants for the applicable Warranty
Period below that products made by it and sold through its authorized sales channels are free from defects in material and
workmanship. In the event of any defect, JLG’s sole obligation is expressly limited to repair or replacement, without charge, at
JLG’s factory after prior written return authorization has been granted. This Warranty shall not apply to products which have been
altered, improperly used, or repaired outside of JLG’s factory nor shall it apply to defects for which written notification thereof is not
received by JLG within the applicable Warranty Period. The Warranty Period for all JLG Trac Lighting products is one (1) year from
date of purchase, except as follows: The Warranty Period for LED general lighting products is five (5) years from date of purchase.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND WITHOUT EXCLUDING THE
GENERALITY OF THE FOREGOING, EXCLUDES ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
The use of other company’s (non-JLG) products or components (i.e. Trac lights, connectors, trims, etc.) in conjunction with JLG
products may not be covered by UL classification, and could be hazardous. Such usage, whether covered by UL classification or
not, automatically voids all JLG product warranties.
Product Services Phone (888) 387-2212
