SAVE THESE INSTRUCTIONS and refer to them when making any additions or
changes to the track configuration.
MLP1J1 MonoLine End Feed
MLP1J4 MonoLine “L” Joiner Feed
Make sure main power to system is OFF.
Note polarity feature at bottom of opening
in feed connector.
Note which side of track has a groove to
accept the polarity feature. The grooved
side of the track should be facing down.
Insert track fully into feed connector aligning
polarity feature with groove.
Tighten set screw(s) securely with the
hex wrench provided.
5
4
3
2
1
WARRANTY
Limited warranty located at:
www.acuitybrands.com/customerresources/terms_and_conditions.aspx
2 of 2
1300 S. Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • Visit us at www.acuitybrands.com/juno-trac
©2017 Acuity Brands Lighting, Inc. Rev 3/17 P3198
INSTALLATION INSTRUCTIONS
MLP1J1 MonoLine
®
End Feed
MLP1J4 MonoLine
®
“L” Joiner Feed
