Visible lime deposits or white film on the
dishes
■
There is no salt or the softener has not been adjust-
ed to the hardness of the water.
■
The rinse aid has run out or too little is being used.
The machine is noisy
■
The dishes are rattling against each other.
■
The spray arms are knocking against the dishes.
The dishes are not quite dry
■
The dishes have been left too long inside the ma-
chine.
The door is difficult to close
■
The dishwasher is not level or is not properly built-
in.
If, after the above checks, the fault persists, call your
nearest Service Centre, indicating the fault, the appli-
ance model (Mod.), the product number (Prod. No.)
and the serial number (Ser. No.). This information can
be found on the rating plate located on the right-hand
side of the dishwasher door (see picture).
Original spare parts can be purchased from Service
Centres.
Protection against flooding
In order to prevent water floods, the machine has
been provided with two additional devices, having the
following characteristics:
1. In the water inlet hose (see water connection): the
device comes into operation as a result of any
damage to the water inlet hose and stops the water
inflow. It functions even with the machine off.
2. In the bottom of the machine: the device comes
into operation as a result of any water leaks in the
machine and it functions only with the machine on.
To repair the machine, call the Service Centre.
PRA30GB
59
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
ENGLISH
