JUNO JKU2438, Руководство по эксплуатации, Страница: 8 / 14

1. Pull off the ventilation grille (D), which is a clip-on
fit. Remove the bottom hinge (E) by unscrewing its
two fixing screws.
2. Remove the plugs (G) and fit them on the opposite
side.
3. Remove the door (4).
4. Unscrew pin (2) and screw it onto the opposite
side.
5. Refit the door.
6. Refit the bottom hinge on the opposite side using
the two screws previously removed.
7. Slide the hole cover (F) off the ventilation grille (D)
and fit it on the opposite side.
8. Refit the ventilation grille, clipping it into place.
9. Remove the clip-in screw covers, then move the
handle to the opposite side. Holes which are not
used must be masked with the plastic plugs
previously removed from the opposite side.
Warning!
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
If there is a power failure when food is in the freezer, do not open the door of the freezer
compartment. The frozen food will not be affected if the power cut is of short duration (up to 12
hours) and the freezer compartment is full, otherwise, it is recommended that the food should be
used within a short time (a temperature increase of the frozen food shortens its safe storage
period).
Door reversal
Inner door reversal
180
°
1 2 3
4 5
18