15
Open both the appliance door and that of the kitchen
unit to approx. 90
°
.
Place the little plates over the runners.
Hold the doors of the appliance and the unit together
and mark the holes.
Fig. 8
Remove the little plates and make the holes with a di-
am. of 2 mm. Replace the little plates over the runners
and screw in the screws provided (3.5x16 mm).
If the kitchen unit door needs to be re-aligned, adjust
the position of the screws in the slots.
At the end of the procedure, check that the doors of
the appliance and the kitchen unit open properly.
Fig. 9
8mm
D415
D416
If the appliance is to be fitted laterally to the kitchen
unit, it will be sufficient to loosen the screws of the lit-
tle plates (F), move them as shown in Fig. 9a and then
fasten them up again. Fit the cover (G).
Fig. 9a
G
F
D398
