35
Changing the light bulb
1
Warning! There is a risk of electric shocks!
Before changing the light bulb, switch off the
appliance and unplug it, or pull the fuse or
the circuit breaker.
Light bulb data: 220-240 V, max. 15 W, fitting: E 14
1. To switch off the appliance, turn the temperature
regulator to position "0".
2. Unplug the mains plug.
3. To change the light bulb, undo the cross head
screw and remove the light bulb cover.
4. Change the defective light bulb.
5. Refit the light bulb cover and the cross head
screw.
Noises during Operation
The following noises are characteristic of refrigeration
appliances:
•
Clicks
Whenever the compressor switches on or off, a
click can be heard.
•
Humming
As soon as the compressor is in operation, you
can hear it humming.
•
Bubbling/Splashing
When refrigerant flows into thin tubes, you can
hear bubbling or splashing noises. Even after the
compressor has been switched off, this noise can
be heard for a short time.
Regulations, Standards, Guidelines
This appliance was designed for household use and
was manufactured in accordance with the appropriate
standards. The necessary measures in accordance
with appliance safety legislation regulations (GSG),
accident prevention regulations for refrigeration appli-
ances (VBG 20) and the regulations of the German
Society of Electrical Engineers (VDE) were observed
in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
This appliance is in accordance with the following EU
guidelines:
– 73/23/EEC dated 19 February 1973 - low volt-
age guidelines.
– 89/336/EEC dated 3 May 1989
(including
guideline
change
notice
92/31/
EEC) - EMV guideline
– 94/2/EC dated 21. 01. 1994 - Directive on
Energy Labelling
– 96/57 EC dated 3. 9. 1996 - Energy Efficiency
Requirements of Household Electric Refrigera-
tors, Freezers and Combinations Thereof.
3
