JUNO JGVX605E1, Руководство пользователя

Страница: 23 / 56

Problem and alarm code Possible cause and solution
Malfunction of the water lev‐
el detection sensor.
• The lights related to the
programme buttons flash
4 times intermittently.
• An acoustic signal
sounds intermittently.
• Make sure that the filters are clean.
• Switch the appliance off and on.
Malfunction of the wash
pump or the drain pump.
• The lights related to the
programme buttons flash
5 times intermittently.
• An acoustic signal
sounds intermittently.
• Switch the appliance off and on.
The temperature of the wa‐
ter inside the appliance is
too high or malfunction of
the temperature sensor oc‐
curred.
• The lights related to the
programme buttons flash
6 times intermittently.
• An acoustic signal
sounds intermittently.
• Make sure that the temperature of the inlet water does not
exceed 60°C.
• Switch the appliance off and on.
Technical malfunction of the
appliance.
• The lights related to the
programme buttons flash
12 times intermittently.
• An acoustic signal
sounds intermittently.
• Switch the appliance off and on.
The level of water inside the
appliance is too high.
• The lights related to the
programme buttons flash
15 times intermittently.
• An acoustic signal
sounds intermittently.
• Switch the appliance off and on.
• Make sure that the filters are clean.
• Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation instruc‐
tions.
The appliance stops and
starts more times during op‐
eration.
• It is normal. It provides optimal cleaning results and ener‐
gy savings.
The programme lasts too
long.
• If the delay start option is set, cancel the delay setting or
wait for the end of the countdown.
• Activating Extra power increases the programme duration.
23