21
Right opening
Remove the pins (P) and (P1)
Left opening
Remove (P) from both sides and the door.
Remove the middle hinge (A) and refit it on the
opposite side.
Refit the door and (P) on the left side.
Remove (P1) from the right side.
Door reversibility
ATTENTION!
It must be possible to disconnect the appliance from
the mains power supply; the plug must therefore be
easily accessible after installation.
P
P1
P1
P
D544
1
This appliance complies with the following
E.E.C. Directives:
- 87/308 EEC
of 2/6/87 relative to radio interference
suppression.
- 73/23 EEC
of 19.2.73 (Low Voltage Directive) and
subsequent modifications;
- 89/336 EEC
of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Inner door reversal
1) Using a screwdriver release bracket (1) by
pressing on the internal spring (Fig. 11) and
withdraw it from its seat together with the door;
2) remove plug (2) and fit it in the hole left open on
the opposite side;
3) turn the door through 180¡, remove the bracket
(1) and refit it on the opposite side. Refit the door
and insert the top pin and bottom bracket (1),
pushing it into place.
4) To ensure correct storage of food, the door is
fitted with a simple spring device which holds it in
the open position until it is properly closed.
PR140
1
2
180
°
