JUNO JB121D0, Руководство пользователя

Страница: 45 / 64

8.4 How to set: End Time
1. Set a heating function and temperature.
2. Press again and again until starts
to flash.
3. Press or to set the End Time and
press . First you set the minutes and
then the hours.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing and
the time setting . The oven turns off
automatically.
4. Press a sensor field to stop the signal.
5. Turn off the oven.
8.5 How to set: Time Delay
1. Set a heating function and temperature.
2. Press again and again until starts
to flash.
3. Press or to setthe minutes for
Duration.
4. Press .
5. Press or to set the hours for
Duration.
6. Press .
The display shows flashing .
7. Press or to set the End Time and
press . First you set the minutes and
then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at the set
End Time. When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing and the time setting . The oven
turns off automatically.
8. Press a sensor field to stop the signal.
9. Turn off the oven.
When the Time Delay function is
turned on, the display shows a symbol of
the heating function, with a dot and
. The dot shows which clock function is
on in the Clock / residual heat display.
8.6 How to set: Set + Go
You can use the Set + Go function only when
the Duration is set.
1. Set a heating function and temperature.
2. Set the Duration.
3. Press again and again until the display
shows flashing .
4. Press to set the Set + Go function.
The display shows and with an
indicator. This indicator shows which clock
function is activated.
5. Press a sensor field (apart from ON /
OFF) to start the Set + Go function.
8.7 How to set: Minute Minder
1. Press .
The display shows flashing and "00".
2. Press to switch between options. First
you set the seconds, then the minutes
and the hours.
3. Press or to set the Minute Minder
and to confirm.
4. Press or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes and the display shows flashing
00:00 and .
5. Press a sensor field to stop the signal.
8.8 How to set: Count Up Timer
1. To reset the Count Up Timer press:
again and again until display shows
flashing .
2. Press and hold: . When the display
shows "00:00" the Count Up Timer starts
to count up again.
ENGLISH 45