Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
[email protected]
In your request please include the product
number code (PNC) found on the rating
plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
BASIC SETTINGS
You can configure the appliance by
changing basic settings according to your
needs.
Num‐
ber
Settings
Values
Description
1)
1
Water hard‐
ness
From level 1L
to level 10L
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Factory setting: 5L.
2
Rinse aid level
From level 0A
to level 6A
Adjust the level of the rinse aid according to
the necessary dosage.
Factory setting: 4A.
3
End sound
1b (on)
0b (off)
Activate or deactivate the acoustic signal for
the end of a programme.
Factory setting: 0b.
4
Auto door
open
1o (on)
0o (off)
Activate or deactivate the AirDry.
Factory setting: 1o.
5
Key tones
1F (on)
0F (off)
Activate or deactivate the sound of the but‐
tons when pressed.
Factory setting: 1F.
6
Latest pro‐
gramme selec‐
tion
1H (on)
0H (off)
Enable or disable the automatic selection of
the most recently used programme and op‐
tions.
Factory setting: 0H.
7
Display on
floor
1C (on)
0C (off)
Activate or deactivate the TimeBeam.
Factory setting: 1C.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode. Instructions on how to
configure the appliance are provided
further in this chapter.
When the appliance is in setting mode, the
display shows a digit and a letter. For
each setting, a dedicated letter is
displayed. The dedicated letters are
indicated in the table.
10
Содержание 911 434 642
Страница 1: ...JGVX608D1 User Manual Dishwasher Benutzerin formation Geschirrsp ler...
Страница 59: ......
Страница 60: ...117857150 A 302020...
