Analogue Solutions | FUSEBOX | Manual
FADE IN
This control sets a delay time for modulation. The time between hitting a MIDI key
and the LFO signal to reach maximum.
It only affects the Sine wave. The delay is initiated from MIDI Note.
Here’s how it happens.
The Sine wave is always running at full level. As soon as you hit a MIDI Note the
Sine level goes to zero then slowly climbs to full level at a rate set by the FADE IN
control.
Use for delayed vibrato affects (when patching Sine out to Global Pitch in).
The LFO Jacks
The Sine wave and Square waves each have two jack socket outputs.
The lower Square wave socket is at a slightly lower level than the one above.
Patch these outputs to other areas of the synth, for example to modulate a VCO’s
pitch or Pulse Width.
The square wave can be used as a clock source for Patternator or the Arpeggiator.
Fusebox - 30 Oct 2017
| Page
!
21
